|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-06-2017, 01:35 PM | #11 |
Gone Wild
Join Date: Jul 2016
Location: Charlotte NC
Posts: 1,165
|
Re: CC DS A8629 102604 Rebuild
Great progress, looking good.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-15-2017, 06:37 PM | #12 |
Getting Wild
Join Date: Nov 2016
Posts: 87
|
Re: CC DS A8629 102604 Rebuild
Thanks Aflyer.
I've now have run into another problem. On my new steering box, when I turn the wheels all the way to the right the rubber shield top off at the end. I put a smaller zip tie in place. It still tops off. Any fix? Got a new D&D ES81 motor on order from Revolution Golf Cars. A sponsor on here. Caint wait! |
02-16-2017, 12:06 PM | #13 |
Gone Wild
Join Date: Jul 2016
Location: Charlotte NC
Posts: 1,165
|
Re: CC DS A8629 102604 Rebuild
Sorry BillDurden.
I have no experience with that problem. But, I bet Dave, Revolution Golf Cars, could answer that question for you. Aflyer |
02-16-2017, 12:32 PM | #14 |
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: CC DS A8629 102604 Rebuild
Is that the same bellows in your picture/post "installed new steering rack"? There is a left and right bellows on ds racks. One is longer/more ribs than the other. You need a shorter one for the drivers side. Also a large washer between the nut and bellows helps too.
|
02-16-2017, 07:11 PM | #15 |
Getting Wild
Join Date: Nov 2016
Posts: 87
|
Re: CC DS A8629 102604 Rebuild
The steering assembly will fit only one way on the cart. The long side goes on the driver side. There is no nut on this end. There is a groove on end of shaft to apply a small zip tie to the bellow, zip tie should hold the bellow in the groove.
But can not make it happen. When the shaft goes in is when the bellow p.ops of the end of shaft. |
02-16-2017, 08:37 PM | #16 |
Gone Wild
Join Date: Oct 2016
Location: Dundee quebec
Posts: 3,190
|
Re: CC DS A8629 102604 Rebuild
AHH. Mine have a bit of thread and a nut. But no matter, it looks, by the picture, that someone put a passenger, [long] bellows on the drivers side. You need a short one.
|
02-17-2017, 04:26 PM | #17 |
Getting Wild
Join Date: Nov 2016
Posts: 87
|
Re: CC DS A8629 102604 Rebuild
In the picture the bellow on the driver side is popped off the end of shaft.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
295 rebuild to a 350 | Gas EZGO | |||
Another 91 DS rebuild | Electric Club Car | |||
Top end rebuild | Gas Club Car | |||
My G-9 rebuild | Gas Yamaha | |||
86 rebuild | Gas EZGO |