|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-06-2020, 08:40 AM | #1 |
Not Yet Wild
Join Date: Sep 2018
Posts: 43
|
2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
2009 RXV Danaher - won't go forward or reverse yet solenoid clicks, reverse bell works...I'm stumped.
I've checked all 5 fuses under the seat...all are still good. When I turn the key to reverse, the buzzer comes on, but when i press the accelerator, nothing, if I switch to forward, the solenoid clicks, but again, no movement. I've pulled up on both the accelerator and the brake...still, cart doesn't move in either direction. Is there another fuse on this that I missed somewhere? I'm falling short on where to test with the multimeter... Any help would be appreciated. Happy isolation to everyone btw! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-06-2020, 11:01 AM | #2 |
Not Yet Wild
Join Date: Sep 2018
Posts: 43
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
Nothing...nobody...Beuller...Beuller...Beuller...
|
04-06-2020, 11:12 AM | #3 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,234
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
Pull up the floor mat and check the brake and throttle switches and sensors. Use the trouble shooting guide to see how you check them.
A Danaher handheld would come in handy at the moment. |
04-06-2020, 11:33 AM | #4 |
Not Yet Wild
Join Date: Sep 2018
Posts: 43
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
Thx! Where can I find the troubleshooting guide? Simple google search?
|
04-06-2020, 11:52 AM | #5 |
Not Yet Wild
Join Date: Sep 2018
Posts: 43
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
Found a bunch of posts (on this site) for troubleshooting. Thanks USGICOLLECTOR!
|
04-06-2020, 12:12 PM | #6 |
Not Yet Wild
Join Date: Apr 2020
Posts: 1
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
We’re having the same issue. Thinking it’s the controller... we’ve changed everything else. Any luck for you??
|
04-06-2020, 02:08 PM | #7 |
Not Yet Wild
Join Date: Sep 2018
Posts: 43
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
No luck, but I'm not done testing some of the other components...I can't imagine the controller just stopped working like that.
|
04-07-2020, 07:36 PM | #8 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2009 Danaher RXV - Reverse bell good, solenoid getting juice but doesn't move...
There were reasons E-Z-GO stopped using Danaher controllers in early 2012.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2009 RXV Danaher | Electric EZGO | |||
2000 PDS Forward / Reverse Conversion (Bell Type to Rocker Switch on the Dash) | Electric EZGO | |||
Solenoid not engaging with Forward / Reverse switch? (Solenoid is good) | Electric EZGO | |||
I have juice but the cart won't move! | Electric Yamaha | |||
melex 512e has good solenoid,36 volts to controller, wont move | Melex |