DCS Alltrax Solenoid question

[dgjmis55]

DCX 300 controller failed in my 36v DCS cart, bought new XCT Alltrax controller from CartsUnlimited. I bought the upgrade and have a question about the upgraded solenoid that came with kit.

Original standard duty solenoid had large posts on side for main connections and 2 small posts. On one post (cart side) are small Red, Yellow and yellow/white wires. Second small post (on batt side) has one small blue wire.

I am unclear on where to connect on the 4 spade connectors on the upgraded solenoid. The new solenoid has the 2 large connectors on top and then 4 spade plugs (2 marked + and 2 marked -).

Any idea on what needs to be done with these 4 small wires?

Thanks.

[dgjmis55]

Looking closer I am assuming the 3 wires (Red, Yellow, Yell/White get put it one spade end and plugged on the - port, and the single blue plugs on the + spade.

Does this sound correct?

[JohnnieB]

Originally Posted by dgjmis55

Looking closer I am assuming the 3 wires (Red, Yellow, Yell/White get put it one spade end and plugged on the - port, and the single blue plugs on the + spade.

Does this sound correct?

You've got it backwards.

The three wire connect to one of the two + spade lugs.
The single blue wire connected to one of the two - spade lugs.

The diode connects between the other two lugs, with the banded end connected to the + lug.