94 Marathon Brake Pedal Question

[ddecaron]

I have a 94 Marathon that working on restoring and at the point of trying to get this thing looking good cosmetically. I have replaced the accelerator pedal pad and had no problems with it. On to the brake pedal pad. As you can see in the pictures, the one that I ordered for the 94 and up TXT clips onto the parking brake correctly but is too narrow and the one that I ordered for the marathon (supposed to be for 94 model) says HILL BRAKE on it (not shown in these pics) and is not rounded at top and rivot holes do not match up with the hole patterns in the metal part behind the pedal pad. Does anyone know anywhere I can find one like the one that is worn in the picture and if you need measurements, let me know and I can get them to you. Thanks for your help. I didn't realize that such an inexpensive part would be such a pain in the "you know what."

[mikesmotortoys]

We have them on our website catalog. I had to check to make sure that they were still available You do not have enough posts to open up your Private Messages, so I cannot send you the link. Part number is #1825

[ddecaron]

Thanks for the quick reply. I looked on your website and have tried those as well. They do not fit. My buggie is a 94 and the parking brake is rounded at the top like the TXT and medalist but the pedal is wider than these. It also says that that is for up to a 92 marathon. I have already tried to put one of those on as well and rivot holes do not match up.

[Jkilmurray]

Reviving an old thread but I have the same problem and don’t know where to go.