|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-04-2011, 09:11 AM | #1 |
Gone Wild
Join Date: Feb 2010
Location: Alabama
Posts: 455
|
controller swap?
I have aquired a 1994 Medalist that won't run. I will be troubleshooting hopefully in the next few days. The controller on the Medalist has 4 large terminals B-,B+,M- & A2.
I have a good controller that I took from my 2004 Series TXT that does not have the A2 terminal. Will this controller from the 04 TXT work on the Medalist? If so what would be the wiring changes? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2011, 08:52 PM | #2 |
Gone Wild
Join Date: Feb 2010
Location: Alabama
Posts: 455
|
Re: controller swap?
Hey guys,
Found some wiring diagrams on here from Scottyb - I think I figured it out. The curtis controller with the A2 must have the plug brake option. Roady had previously told me that Curtis made one with it, but it never really worked. I have an Alltrax schematic without plug brake, and the A2 terminal is not there. I will wire it like this Alltrax diagram if it turns out it is the controller that is bad. Thanks Scottyb and Roady! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
controller swap???? | Electric EZGO | |||
Can i swap G19 with G22 controller? | Electric Yamaha | |||
controller swap question | Electric Club Car | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |