|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-31-2018, 01:53 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 4
|
Won't shift into gear!!
I have a 2008 ezgo sthl 4/6 gas cart. After recently getting it to run, it now wont shift into gear. It seems as if something inside the transmission ( ME29 ) is stuck. The reverse cable or stuck but even with the rocker on it won't budge. I managed to smash it into to gear but the wheels still wont spin. Clutches work perfectly. Am I missing something? Can anyone point me in the right direction?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-01-2019, 12:50 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: Won't shift into gear!!
Probably need to get some shift cables would be a good start then grease things from there got a $1 that says it will work
You are missing some hardware on one of the cables |
|
|
|
|
01-01-2019, 03:06 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2018
Posts: 4
|
Re: Won't shift into gear!!
I will try it. It just seems like it stuck from the inside. I just soak it in wd or PB blaster and see if it will free up. Definitely getting new cables and linkage stuff. Is there a neutral lock out I dont know about?
|
|
|
|
|
01-01-2019, 05:08 PM
|
#4 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: Won't shift into gear!!
Is there a neutral lock out I dont know about?
Yes, pull the thing right next to the stud without a spring and nut, in your first picture. One way is for towing, the other for running :) down da road :) |
|
|
|
|
01-01-2019, 05:36 PM
|
#5 |
|
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: Won't shift into gear!!
Yea they are pull-pull cables so having both working is a must you can move the linkage by hand but kinda hard
Not much leverage |
|
|
|
|
01-01-2019, 10:33 PM
|
#6 |
|
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,215
|
Re: Won't shift into gear!!
I know how they work dirtyyoda77. He just asked
Is there a neutral lock out I dont know about? and I replied. |
|
|
|
|
01-02-2019, 02:51 AM
|
#7 |
|
British born Nincompoop
 Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: Won't shift into gear!!
Try removing both cables from the shifter and try putting in gear by hand. If that works, then one or both cables are seized and need replacing. As already stated, the cables both work by pulling in opposition to each other and if one is seized, neither cable can operate the shifter properly.
|
|
|
|
|
01-03-2019, 01:49 PM
|
#8 | |
|
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: Won't shift into gear!!
Quote:
|
|
|
|
|
|
05-01-2020, 06:02 PM
|
#9 |
|
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: Won't shift into gear!!
thanks for the tip and the manual page about the neutral lock on the shifter. It fixed a cart for a friend that wouldn't shift, imagine that. Thanks again.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Help? It won't shift into gear running. | Clone Engine Swaps | |||
| Yamaha g16 won't shift into high gear | Big Block Talk! | |||
| could someone, would someone take two pictures of the gear shift cable? | Gas Club Car | |||
| ezgo stuck in gear will not shift | Gas EZGO | |||
| 1992 G-9 wont shift into gear | Gas Yamaha | |||
Linear Mode
