Checking voltage output on my starter Generator

tuf-duc · 03-13-2019, 10:23 AM

Need a little guidance here. Which terminals do I use to check the voltage output on my starter generator?

meimk · 03-13-2019, 10:43 AM

For voltage you can just use the battery terminals.Compare voltage at rest vs voltage while running. If there is no change, yes the voltage regulator by jumping the green lead at the regulator to ground - should cause starter generator to charge "full blast" 18+ volts, so just do it momentarily.

03-13-2019, 10:23 AM	#1
tuf-duc Getting Wild Join Date: Oct 2010 Location: Haslet, Tx Posts: 92	Checking voltage output on my starter Generator Need a little guidance here. Which terminals do I use to check the voltage output on my starter generator?

03-13-2019, 10:43 AM	#2
meimk Gone Wild Join Date: Jun 2011 Location: Northern Indiana Posts: 2,821	Re: Checking voltage output on my starter Generator For voltage you can just use the battery terminals.Compare voltage at rest vs voltage while running. If there is no change, yes the voltage regulator by jumping the green lead at the regulator to ground - should cause starter generator to charge "full blast" 18+ volts, so just do it momentarily.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
1991 club car starter generator output.	Gas Club Car
Testing Charge Output of Starter/Generator	Gas Club Car
Starter/Generator voltage	Gas Harley Davidson
Yamaha G2 Starter Generator output for LED's	Gas Yamaha
Generator output voltage?	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum