Carryall LED taillights.

[KRAZYMATT]

Does anyone know a place to get led tail lights or how to make ds taillights work with the carryall? The carryall doesn’t have the bezel around the lights they are surface mounted on the rear valance. I took the 2 screws out of regular da tail light they were threaded into the bezel and the led board was attached to the bezel. I assume I could attach the led board right to the rear valance then get longer screws with nuts and through bolt the lens over it but my concern is there is not seal or anything. What do the carryall tail light assemblies look like and does anyone have decently priced source for led units?

[Fairtax4me]

There were two different types, but the DS style lights should fit in the rear valance. You just may need to cut the holes out of the valence for them to fit.
The newer aftermarket style lights I'm pretty sure are surface mounted and you just drill two holes for the screws and a 1/2" hole in the center for the wires to go through.

You could also install surface mount oval or round trailer LED lights.

[KRAZYMATT]

This exactly what I am looking for :



Can’t find em for sale anywhere. I’d pay for expedited shipping also.

[Fairtax4me]

Site sponsors man! They got everything, and if they don't "list" it online, they can usually get it.

https://www.ecartparts.com/golf-cart...for-e-z-go-txt