|
09-23-2008, 07:46 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2008
Location: illinois
Posts: 40
|
reverse
my 2004 txt when a complete stop ounce in awhile i shift into reverse and it sounds like my clutch is turning but the belt is not engaging after a few seconds the belt engages and i hear a loud clunk then it runs ok i got a head of my self it happens after i put it in reverse and step on gas it happens had chemo today not thinking strait is my belt in need of changing or am i looking at some big expense?
 your help would be greatly appreciated |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-23-2008, 08:19 PM
|
#2 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: reverse
Could be the shifter cable needs adjustment, is there a a clicking noise also?
|
|
|
|
|
09-23-2008, 10:50 PM
|
#3 |
|
The Last Moja Morani
 Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: reverse
have you tried getting the rear wheels off the ground and than taking the seat off and try to see just where the clunk is coming from? could be clutch sticking, or bad motor mount........try and pinpoint the noise.........................
 |
|
|
|
|
09-23-2008, 11:08 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2008
Posts: 67
|
Re: reverse
Your F/R cables need a slight adjustment. Nothing to worry about
|
|
|
|
|
09-24-2008, 04:47 AM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2008
Location: illinois
Posts: 40
|
Re: reverse
i will try your ideas after i get over this last treatment this one kicked my butt thank you very much:
 |
|
|
|
|
09-24-2008, 02:13 PM
|
#6 |
|
Not Yet Wild
Join Date: Sep 2008
Location: illinois
Posts: 40
|
Re: reverse
what can i do if clutch is sticking?
|
|
|
|
|
09-24-2008, 04:58 PM
|
#7 |
|
Not Yet Wild
Join Date: Aug 2008
Posts: 67
|
Re: reverse
Put the cart in neutral and start it. rev it until the drive clutch engages and use a piece of emory cloth to clean the end of the clutch shaft. Then lube it with some WD-40. That usually works for me.
|
|
|
|
|
09-26-2008, 08:13 AM
|
#8 |
|
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: reverse
Glenn, read your profile, Thank you and good luck in all you do.
|
|
|
|
|
09-26-2008, 11:12 AM
|
#9 |
|
Not Yet Wild
Join Date: Sep 2008
Location: illinois
Posts: 40
|
Re: reverse
DOOsman we re not that far from each other i live in pontiac my cart is at the camp grounds in cornell
|
|
|
|
|
06-18-2020, 12:31 PM
|
#10 |
|
Not Yet Wild
Join Date: May 2020
Posts: 6
|
Re: reverse
What is procedure to tightening the locknut without the cable spinning
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 91 electric cc / no reverse | Electric Club Car | |||
| 91 CC Takes Off In Reverse | Electric Club Car | |||
| no reverse | Electric Yamaha | |||
| No Reverse | Electric Yamaha | |||
| reverse buzzer? | Electric Club Car | |||
Linear Mode
