01-17-2015, 06:08 PM | #11 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Speed problems
Actually you only tested half of the MCOR with the paperclip test. But from what you're saying it could still be your MCOR.
Also with the speed sensor test the buzzer should pulse and not be on steady. That said either one could be your problem. Speed sensors and MCOR's are relatively cheap. Pick one and replace it. Sometimes you will never know a part is bad for sure until you replace it |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2015, 06:14 PM | #12 | |
Not Yet Wild
Join Date: Jan 2015
Posts: 11
|
Re: Speed problems
Quote:
|
|
01-17-2015, 06:29 PM | #13 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Speed problems
Is your motor stock? Plum Quick motors work a little different. Or some motors don't use the warning rollaway alarm.
|
01-17-2015, 07:01 PM | #14 |
Not Yet Wild
Join Date: Jan 2015
Posts: 11
|
Re: Speed problems
not sure what you mean by plum quick but i attached a pics of my motor.
|
01-17-2015, 07:35 PM | #15 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Speed problems
Do you have a digital volt meter?
|
01-17-2015, 07:36 PM | #16 |
Not Yet Wild
Join Date: Jan 2015
Posts: 11
|
Re: Speed problems
yes i do
|
01-17-2015, 07:56 PM | #17 |
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Speed problems
This will check the other half of the MCOR. Disconnect the triangular connector from the MCOR. Identify what pins in the Mcor connect to the green and yellow wires in the plug. Connect your DVM in resistance mode to these pins "on the mcor" You should read 6 to 7k ohms with the pedal up and <1k ohms with the pedal down. Next do the same with the purple and yellow wires. They should read 6 to 7 k all the time pedal up or pedal down. Post your readings when done. As usual make sure tow/run switch is in tow.
|
01-17-2015, 08:02 PM | #18 |
Not Yet Wild
Join Date: Jan 2015
Posts: 11
|
Re: Speed problems
thanks. will do this at first light tomorrow and will report back.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
PDS speed sensor problems | Electric EZGO | |||
EZGO low speed problems | Electric EZGO | |||
94 DS speed problems | Electric Club Car | |||
Speed Problems | Electric Club Car | |||
95 low speed problems | Gas EZGO |