2007 E-Z-GO Freedom speed question

[Alexcavs7]

I don't understand the wire codes and stuff could you explain it with like the colors and locations of cords.. Thanks

[yurtle]

I don't know what you're asking above, but the question posted below indicates you know how to read the "beeps". Since your beeper doesn't work, I was offering an alternative way to get the same info, either with a DVM or a light bulb.

JohnnyB told you how to tell if the controller was telling the beeper to beep, but we haven't heard back on whether you've tried this. If your controller is telling the beeper to beep, then you have a wiring problem from controller to beeper, or a beeper problem.

Originally Posted by Alexcavs7

Alright thanks! I wanted to check to make sure it is in freedom mode but when I try to do the diagnostic mode it doesn't make any beeps. And Idea of how to fix that?

[scottyb]

You can gps the cart with your phone and if she is going 18-19 mph on the flats with a full charge you go it Or.....
You can remove the environmental cover over the speed control and look at the color of the 'chip' ...... red is freedom.