|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-02-2021, 12:52 PM
|
#1 |
|
Getting Wild
Join Date: Mar 2021
Posts: 82
|
Halo light kit - turn indicator notification
I have installed the profit halo light kit on my 2028 rxv.
I want to install an indicator when my turn signals are on. Would I tap in to the brown and yellow wire for a beeper on the black box in the picture? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-02-2021, 07:52 PM
|
#2 |
|
Getting Wild
Join Date: Mar 2021
Posts: 82
|
Re: Halo light kit - turn indicator notification
I attached a dvm to these wirs and see 12 volts when turn signal is on, but when I hook up a beeper it doesn’t beep when turn signal is on. Beeper was tested with a 12 volt source and works.
|
|
|
|
|
12-02-2021, 08:38 PM
|
#3 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,171
|
Re: Halo light kit - turn indicator notification
If beeper is getting 12V it should work. Make sure you don't have it connected reverse polarity.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ProFit Halo LED Light Retrofit Question (2018 RXV) | Electric EZGO | |||
| ProFit Halo LED Light Kit - Modify Question (2018 RXV) | Electric Club Car | |||
| Turn Signal Indicator Light Remains "On". | Electric Club Car | |||
| Turn indicator light on a 2011 Yahama | Gas Yamaha | |||
Linear Mode
