|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-13-2010, 10:38 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2010
Posts: 23
|
1995 medlist ezgo, problems in switching to REV and FWD aslo grinding sounds?
My golf cart has one issue that i would like to find out whats wrong... Ok so when I put it in to reverse it the cable onlt pulls the spring half way down do it in about newturle but if you step on the gas bit it will lock into place maing a buzzing sound. when you switch it to forward it does the same thing??? is the cable loose and need to be tighted of what??? on to a different topic it also make a gringing sound when you first start off slow?? are the gers getting bad?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 85 ezgo no power sounds funny headgasket? | Gas EZGO | |||
| EZGO Freedom hesitates when switching into forward or reverse....solenoid? | Electric EZGO | |||
| Switching from a Powerdrive II to a Lestronics charger. | Electric Club Car | |||
| Help switching from 36 to 48 volt!! | Electric Club Car | |||
| throttle problems on 1995 ezgo | Electric EZGO | |||
Linear Mode
