|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-17-2012, 06:59 PM | #21 |
Gone Wild
Join Date: Sep 2011
Location: Flint Mi.
Posts: 248
|
Re: yamaha g1 front motor cluch question
look what I found on ebay !
http://www.ebay.com/itm/Yamaha-Goft-...item3a71d8f338 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2012, 09:23 PM | #22 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: yamaha g1 front motor cluch question
There you go its never been on a bike lol. Those are hard to find these days.
|
04-01-2012, 09:44 AM | #23 |
Gone Wild
Join Date: Sep 2011
Location: Flint Mi.
Posts: 248
|
Re: yamaha g1 front motor cluch question
|
04-01-2012, 12:17 PM | #24 |
Not Yet Wild
Join Date: Nov 2011
Posts: 7
|
Re: yamaha g1 front motor cluch question
Has anyone used one of the upgraded power spring kits like the one below? How good are they? Thanks!
[URL="http://www.ebay.com/itm/YAMAHA-GOLF-CAR-CART-DRIVEN-CLUTCH-SECONDARY-POWER-SPRING-KIT-G1-G22-1979-2006-/260954931451?pt=LH_DefaultDomain_0&hash=item3cc220 40fb"] |
04-01-2012, 02:54 PM | #25 |
Gone Wild
Join Date: Sep 2011
Location: Flint Mi.
Posts: 248
|
Re: yamaha g1 front motor cluch question
for some reason I can not pull up your web sight , but the spring I am referring to is discussion is the primer spring (the one on the motor end) the other one is the secondary drive spring. Yes I know this sound foolish but that how the golf cart gods have demeaned it. to answer what I think is your question is a up grade of the secondary spring I can only tell you what I have done. first my cart would not go over the curb in front of my house and it is only 4" high.so I started looking for new springs and found out the primary spring was no longer available for a G1 from the factory and no after markets could be found. Reading postings on this forum I noted a lot of talk about upgrading the secondary spring. It worked grate but still the primary spring has a lot of miles on it very week and I realty need a new one I have perches one of the springs off ebay it came by way of a slow boot only because I am cheap and would not pay for fast track shipping. As of today have not had time to install but I due thing this will work fine for my old girl. If there is any thing that should defiantly be replaced on a G1 that is the primer spring! I know because I have replaced every thing else all ready ! on my gold plated golf cart.
look at this sight it may help even tho it is a snowmobile clutch http://www.gates.com/brochure.cfm?br...ocation_id=542 Last edited by nwarren9; 04-01-2012 at 03:10 PM.. Reason: added web page |
04-01-2012, 05:14 PM | #26 |
Not Yet Wild
Join Date: Nov 2011
Posts: 7
|
Re: yamaha g1 front motor cluch question
You are right, i realized I was talking about a different spring after i posted. However i am curious as to how that spring from singapore is going to work for you. Please let me know as im contemplating buying one as well. Thanks!
|
04-03-2012, 06:59 PM | #27 |
Gone Wild
Join Date: Sep 2011
Location: Flint Mi.
Posts: 248
|
Re: yamaha g1 front motor cluch question
just installed new spring I think it works grate no more jump when i giver it gas from stand still, in fact it will set in one spot and just run no brake applied on my machine (idle is set low). but I noted I did not get a very high end speed as with the old spring. That ok for me I wanted a trail rider not flat tracker. "This just my opinion and that all "shade tree wench twister"
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cluch sheave...should I do it myself? | Gas Yamaha | |||
1990 marthon cluch? | Gas EZGO | |||
G2 Primary Cluch | Gas Yamaha | |||
What can go bad in a cluch? | Gas EZGO |