lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-24-2015, 05:17 PM   #1
nitrosport_5
Not Yet Wild
 
Join Date: Jun 2011
Posts: 4
Default 84 club car relays click but won't move!

Hi there, I've got an 84 club car I'm working on for a friend. I cleaned the battery cables and everything and can't get it to move. The relays will all click as you step down on the pedal.

I'm wondering if the issue is motor or the fnr switch. How can I bypass the fnr switch to test that? And how can I bypass the solenoids to see if the motor will spin or not. Thanks in advance!
nitrosport_5 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-24-2015, 05:23 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 4,761
Default Re: 84 club car relays click but won't move!

You can measure and see if you see voltage at the motor. If you do and it isn't turning, then the motor is bad. You can also see if you see voltage across the FNR switch when stepping on the pedal. You should not.
Volt_Ampere is offline   Reply With Quote
Old 03-24-2015, 05:33 PM   #3
nitrosport_5
Not Yet Wild
 
Join Date: Jun 2011
Posts: 4
Default Re: 84 club car relays click but won't move!

What 2 wires at motor should see voltage?
nitrosport_5 is offline   Reply With Quote
Old 03-24-2015, 05:50 PM   #4
nitrosport_5
Not Yet Wild
 
Join Date: Jun 2011
Posts: 4
Default Re: 84 club car relays click but won't move!

Well I have no power whatsoever at the motor.tested each thermal and didn't have anything when stepping on pedal.
nitrosport_5 is offline   Reply With Quote
Old 03-24-2015, 06:17 PM   #5
nitrosport_5
Not Yet Wild
 
Join Date: Jun 2011
Posts: 4
Default Re: 84 club car relays click but won't move!

So the master and all other solenoids are functioning. I'm getting continuity when they click. So if I wanted to bypass the fnr switch, and "hotwire" the cart, would I hook 36v up to the wire that goes into the bank of solenoids? And ground the black wire from the motor to the fnr switch?

Also, the micro switch for the fnr is working so it senses that its in forward and allows the relays to engage. I'm just a little confused. I'm a bit of a noob with electric. I've always had gas carts!
nitrosport_5 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
98 club car 48 volt won't move no click at solenoid Electric Club Car
RXV 2009 click click but won't move Electric EZGO
selenoids click but doesn't move. Electric Club Car
87 CC solenoids click but cart won't move Electric Club Car
Click Click - will not move ! Electric EZGO


All times are GMT -5. The time now is 06:23 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.