|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-31-2009, 03:08 PM | #1 |
Not Yet Wild
Join Date: Oct 2009
Posts: 52
|
Stripped out studs on FNR assemble
I noticed the copper studs were heating up on my FNR switch. Took it apart and they stripped out. I have found the copper studs online. Can I just replace them instead of buy a new FNR switch.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2009, 03:56 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Stripped out studs on FNR assemble
Yes.
|
11-02-2009, 05:41 PM | #3 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: Stripped out studs on FNR assemble
Yes you can, but to save alot of cusing of getting them straight so teh cart will move, get the complete unit, make sure your board isn't worn out and cause your f-n-r switch to be hard
|
11-03-2009, 06:49 AM | #4 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: Stripped out studs on FNR assemble
You can by the studs however, you need to buy all the studs to ensure that the surfaces mate evenly. if you use a new stud and and old stud you will see a gap and the gap equals heat and amp flow loss. You do not need to buy a complete assembly unless the board are showing signs of heat and imbrittlement.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
89 EZGO 19 Spline Coupler Stripped. Help? | Electric EZGO | |||
cc exhaust studs | Gas Club Car | |||
Exhaust bolts/studs for a 83 EZGO? | Gas golf carts | |||
Stripped splines on rear hub | Electric Yamaha | |||
Stripped golf cart axle | Electric EZGO |