|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-02-2013, 06:25 PM
|
#1 |
|
Getting Wild
Join Date: Feb 2013
Location: Claremont Nc
Posts: 95
|
Won't move forward
I have a 1990 model ezgo that I converted to a resistor cart I can get it to go in reverse but I have no forward. When it is put in forward the contacts spark some then the connection on the f n r started smoking not sure what to check
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-02-2013, 08:21 PM
|
#2 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 4,756
|
Re: Won't move forward
Sounds like the FNR switch is not making a good low impedance connection in Forward. That's why it's smoking!
|
|
|
|
04-02-2013, 08:36 PM
|
#3 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 71,330
|
Re: Won't move forward
Yes, increase tension on the low impedance connection
 |
|
|
|
|
04-02-2013, 08:42 PM
|
#4 |
|
Getting Wild
Join Date: Feb 2013
Location: Claremont Nc
Posts: 95
|
Re: Won't move forward
Scotty how do I increase the tension. It's the same f n r that came out of the other cart and was fine
|
|
|
|
|
04-02-2013, 08:47 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 71,330
|
Re: Won't move forward
If its an Ezgo rotary switch tighten the center pivot shaft nut a 1/4 at a time and see if it 'fixes' it...
|
|
|
|
|
04-02-2013, 09:02 PM
|
#6 |
|
Getting Wild
Join Date: Feb 2013
Location: Claremont Nc
Posts: 95
|
Re: Won't move forward
Ok Scotty ill do it and let you know if that works. If it doesn't I have anothe f n r that I can try
|
|
|
|
|
04-03-2013, 05:19 PM
|
#7 |
|
Getting Wild
Join Date: Feb 2013
Location: Claremont Nc
Posts: 95
|
Re: Won't move forward
Scotty tightened the switch up and no more smoke but still won't move forward but the contacts are sparking what is causing this
|
|
|
|
|
04-03-2013, 06:10 PM
|
#8 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 4,756
|
Re: Won't move forward
The contacts are probably burned out to the point where that switch needs to be replaced.
|
|
|
|
|
04-03-2013, 07:07 PM
|
#9 |
|
Getting Wild
Join Date: Feb 2013
Location: Claremont Nc
Posts: 95
|
Re: Won't move forward
The contacts are not in the f n r it is a resistor cart with the contact board for the speed control that's where the sparks are coming from
|
|
|
|
|
04-03-2013, 08:33 PM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 71,330
|
Re: Won't move forward
Okay we get it now...
It sounds like you need to rebuild the speed wiper contact board  Here are some pics of what you are about to fix |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| cant move forward | Electric Club Car | |||
| cant move forward!!!!! | Electric EZGO | |||
| Cart Won't move forward | Electric EZGO | |||
| Can I move the forward/reverse switch? | Electric EZGO | |||
| '92 CC will move in reverse, but, no forward... | Electric Club Car | |||
Linear Mode
