lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-06-2013, 09:00 PM   #1
BailsBuggy
Not Yet Wild
 
Join Date: Sep 2013
Posts: 10
Default Now I'm not expert, but I'm pretty sure this is wrong.

After being pointed in the direction of my speed sensor being the problem on why my cart jerks to a halt when slowing down, this is what I discovered... Any thoughts?
Attached Images
File Type: jpg image.jpg (113.0 KB, 0 views)
BailsBuggy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-06-2013, 09:45 PM   #2
simple man
Gone Wild
 
simple man's Avatar
E-Z-GO
 
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

Possibly a bad motor bearing allowing the shaft to wobble around. I can't think of anything else that would break up the magnet like that.
simple man is offline   Reply With Quote
Old 10-06-2013, 09:58 PM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,442
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

I have seen them crack, and eventually break. That one looks like its off the hitachi motor? They are a little pricey for just being a magnet with a specific number of poles.
cgtech is offline   Reply With Quote
Old 10-07-2013, 07:56 AM   #4
BailsBuggy
Not Yet Wild
 
Join Date: Sep 2013
Posts: 10
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

Cheers guys,
Can't tell if it's a hitachi motor, can't find any hitachi markings on it,
I figured it'd be a pricey little part, (the little ones always are!!!)
Anyway I'm very new to electronic carts so I appreciate the help, now all I've gotta do is track one down, being down here in Aus makes it difficult.
Thanks again.
BailsBuggy is offline   Reply With Quote
Old 10-08-2013, 07:52 PM   #5
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 4,761
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

If you have all of the bits, you can try to fit the puzzle back together and glue it with epoxy. It's just a multi pole magnet.
Volt_Ampere is offline   Reply With Quote
Old 10-09-2013, 06:58 PM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,442
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

Look for this logo on the sticker
Attached Images
File Type: jpg hitachi-logo1258058514.jpg (20.8 KB, 0 views)
cgtech is offline   Reply With Quote
Old 10-09-2013, 10:05 PM   #7
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,442
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

Now i know this is flirting with the competetion (and def not a site sponsor), but your magnet looks very similar to a Nivel part number 3299, magnet for "advanced dc motor", not "hitachi". $41usd
cgtech is offline   Reply With Quote
Old 10-14-2013, 10:10 PM   #8
BailsBuggy
Not Yet Wild
 
Join Date: Sep 2013
Posts: 10
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

That's the one, it's got an "advanced dc motor" sticker on it.... You suggest just googleing that?
BailsBuggy is offline   Reply With Quote
Old 10-16-2013, 02:20 AM   #9
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,442
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

I suggest trying any place that can ship "down under"...any site sponsors here ship global?? Make a new sales avenue???
cgtech is offline   Reply With Quote
Old 10-16-2013, 03:10 AM   #10
BailsBuggy
Not Yet Wild
 
Join Date: Sep 2013
Posts: 10
Default Re: Now I'm not expert, but I'm pretty sure this is wrong.

Cheers mate, the picture of the link you told me doesn't look right but I'll keep shopping round, it looked more like it had a bearing inside rather that teeth.
BailsBuggy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Need Altrax EXPERT 48v 96' Electric Club Car
I Really Need Some Expert Help! Electric EZGO
Looking for a CV Clutch expert Gas golf carts


All times are GMT -5. The time now is 04:12 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.