|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-11-2014, 05:42 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 31
|
Any luck programming the new RXV Curtis controller via Software
I have the updated Curtis controller for my RXV and it has the freedom unlock. Since the dealers are being rather douche'y about helping out with it, I was wondering if anyone has had luck programming their RXV's with the Curtis 1314-4401 software and a serial cable? I just want to tweak the acceleration and speed if possible.
Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2014, 06:08 PM | #2 |
Not Yet Wild
Join Date: Feb 2014
Posts: 32
|
Re: Any luck programming the new RXV Curtis controller via Software
Some people have had success, most have not. For $30 you can rent the handheld programmer that the dealers use here:
Curtis 1311-4401 Rental Good Luck! |
03-11-2014, 06:54 PM | #3 |
Not Yet Wild
Join Date: Mar 2013
Posts: 31
|
Re: Any luck programming the new RXV Curtis controller via Software
Thanks, I have seen that, but they don't carry the adapter to fit the RXV so I thought I would see if anyone has been successful with the RXV and the software.
|
07-30-2015, 11:36 AM | #4 |
Not Yet Wild
Join Date: Jan 2013
Posts: 1
|
Re: Any luck programming the new RXV Curtis controller via Software
We are going to buy the RXV specific unit #83A21150A for $899, not sure what level programming we will get.
Sold at FSIP -http://www.fsip.biz/ They said the 1314 will not talk to the controller. They are the Curtis authorized rebuilders. M |
07-31-2015, 02:50 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Any luck programming the new RXV Curtis controller via Software
To answer the question with pics/proof, yes it can. Gives me no trouble at all.
|
05-23-2016, 12:12 PM | #6 |
Not Yet Wild
Join Date: Nov 2015
Location: Austin, TX
Posts: 14
|
Re: Any luck programming the new RXV Curtis controller via Software
Sorry to dig up an old post but does the 1311-4401 programmer work fine for the RXV with Curtis controller? I have a 2009 RXV but have a new Curtis Freedom controller in it. Was thinking about renting the programmer in the above link, but wasn't sure if I needed the 1313-4401:
http://www.mrksales.net/shop/item.aspx?itemid=89429 Also is the small round plug they also rent the correct one for this controller? Many thanks! |
05-23-2016, 02:45 PM | #7 |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: Any luck programming the new RXV Curtis controller via Software
FSIP does also sell adapters for the standard 4 pin Molex connector to RXV to make the existing handsets work.
1314 does indeed communicate with the 1206AC. But does not work with the 123X series controls, which require a newer version of 1314 and serial adapter. |
01-26-2017, 01:29 AM | #8 |
Not Yet Wild
Join Date: Oct 2016
Location: Summerville, SC
Posts: 11
|
Re: Any luck programming the new RXV Curtis controller via Software
What is the Adapter cable number for a 2013 RXV? Any luck programming with the software?
|
01-26-2017, 06:20 AM | #9 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: Any luck programming the new RXV Curtis controller via Software
Quote:
http://www.buggiesgonewild.com/elect...ml#post1319141 I also make my own programmer cables. http://www.buggiesgonewild.com/elect...ml#post1318414 You may want to read the whole thread to get an education on programming Curtis controllers. Bob |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Programming Curtis Controller | Electric golf carts | |||
Programming a Curtis controller | Electric golf carts | |||
curtis controller software 2006 preceent | Electric Club Car | |||
Curtis Controller Programming Dongle | Golf Carts and Parts | |||
programming curtis ac controller | Electric Club Car |