06-28-2020, 05:02 PM | #1 |
Not Yet Wild
Join Date: May 2017
Posts: 17
|
2 solenoid convertion issues
Ok guys I need help. I have read the stickies, searched the forums and PM'd members. But I am still stuck. I used the following diagram to wire up my cart.
My cart is a 1992 Utility cart 2 stroke. My issue is where do I and how do I wire in the on/off key switch and the new Forward/Reverse switch. I believe that the two new switches should go between the accelerator Micro Switch (Orange wire) and the wire coming off the two small lugs on the solenoid. If I understand it correctly: Key (switch) ON and toggle (switch) OFF cart goes forward. (with Accelerator micro switch activated) Key ON, toggle switch ON cart goes in reverse. (with Accelerator micro switch activated) |
|
|
Similar Threads | ||||
Thread | Forum | |||
Club car with humdinger convertion | Electric Club Car | |||
Ezgo convertion | Gas EZGO | |||
97 Regen convertion? | Electric Club Car | |||
65d Bosch Regulator Convertion | Gas Harley Davidson | |||
EZGO-CLUB 48 convertion | Extreme DC! |