lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-09-2012, 09:37 PM   #1
frodrummer
Gone Wild
 
frodrummer's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah MO
Posts: 216
Default Hei conversion question

I didn't want to crowd the hei sticky thread too much so figured I'd ask here. I noticed that the wiring diagram shows a black wire coming from the hei module to the D- terminal on the regulator. However, many of the pictures of the conversion don't show this specific wire. Is this wire a ground wire for the new hei module? The diagram shows this wire going from the module, to the regulator, then to the C terminal on the solenoid. Does it have to be wired this way, or have any of you set it up different? I am an electrical dummy...
frodrummer is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-09-2012, 10:00 PM   #2
frodrummer
Gone Wild
 
frodrummer's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah MO
Posts: 216
Default Re: Hei conversion question

In addition, my old wiring has the black wire coming from the D- post on the regulator, to the lowest post on the f/r switch. I'm not sure how I should properly set this up. As the cart was, or how the diagram depicts?
frodrummer is offline   Reply With Quote
Old 11-09-2012, 10:15 PM   #3
kyerik
Gone Wild
E-Z-GO
 
Join Date: Aug 2012
Location: South central IL
Posts: 287
Default Re: Hei conversion question

The black wire is a ground that attaches to one of the screw holes of the HEI module. You can run it to any bare metal or directly back to the negative battery terminal.
kyerik is offline   Reply With Quote
Old 11-09-2012, 10:30 PM   #4
frodrummer
Gone Wild
 
frodrummer's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah MO
Posts: 216
Default Re: Hei conversion question

So I'm assuming the same applies with the D- post on the regulator?
frodrummer is offline   Reply With Quote
Old 11-10-2012, 07:50 AM   #5
kyerik
Gone Wild
E-Z-GO
 
Join Date: Aug 2012
Location: South central IL
Posts: 287
Default Re: Hei conversion question

Yes- the D post is a ground and is eventually connected back to the neg batt terminal. It won't hurt to add extra grounds and to interconnect them.
kyerik is offline   Reply With Quote
Old 11-10-2012, 08:11 AM   #6
frodrummer
Gone Wild
 
frodrummer's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: Savannah MO
Posts: 216
Default Re: Hei conversion question

As always kyerik, thanks for your help!! I'm sure I hold the record for dumb questions.
frodrummer is offline   Reply With Quote
Old 11-10-2012, 07:59 PM   #7
racin161
Gone Wild
 
Join Date: Feb 2011
Posts: 1,515
Default Re: Hei conversion question

NO DUMB questions here!!!

LOU
racin161 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Question about a conversion Electric EZGO
48v conversion question Electric EZGO
1991 G2 question. axle conversion Gas Yamaha
Electric to gas conversion question Electric Club Car
HEI Conversion question Gas EZGO


All times are GMT -5. The time now is 03:57 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.