Ignition help

Bigred94 · 08-23-2016, 06:53 PM

This is my first post on this fourm after searching for hours with no real answer. I bought a 2003 ezgo refresher model with a locked engine. It came with no ignition parts also. I need help with what ignition parts to buy. I believe it's a pre mci engine because it says robin eh35c. It also has a manifold that unbolts, but most of the parts for the 03 say mci engine???

Can someone tell me all the ignition parts needed to make it run after the rebuild? Coil and wires, pulse coil, igniter? Are these the only three components on the ignition system minus the plugs and wires?

08-23-2016, 06:53 PM	#1
Bigred94 Not Yet Wild Join Date: Aug 2016 Posts: 1	Ignition help This is my first post on this fourm after searching for hours with no real answer. I bought a 2003 ezgo refresher model with a locked engine. It came with no ignition parts also. I need help with what ignition parts to buy. I believe it's a pre mci engine because it says robin eh35c. It also has a manifold that unbolts, but most of the parts for the 03 say mci engine??? Can someone tell me all the ignition parts needed to make it run after the rebuild? Coil and wires, pulse coil, igniter? Are these the only three components on the ignition system minus the plugs and wires?
Bigred94 Not Yet Wild Join Date: Aug 2016 Posts: 1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Run/tow through ignition?	Electric Yamaha
Pre MCI ignition and MCI ignition parts compatibility	Gas EZGO
HEI Ignition	Gas EZGO
WTB EZ GO Ignition and key	Golf Carts and Parts
Yamaha G9-Ignition Coil & Ignition Switch-Help	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum