|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-16-2018, 01:49 PM | #61 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: Still not working
Thanks —— they did send it , just waiting for the solenoid, hope it’s the right one
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-16-2018, 03:45 PM | #62 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Still not working
The XCT400 requires a 200 amp solenoid
|
09-16-2018, 07:12 PM | #63 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: Still not working
That’s what I’m getting—- a 200a contract /solenoid SW180– says it’s for an Ezgo pds cart—— could you let me know your email address, I tried the one off the thread, but doesn’t seem to go through ——!thanks
|
10-27-2018, 09:42 AM | #64 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: Still not working
Hello again everyone —- I am getting ready to install the new xct400pds controller and SW180 solenoid—- I just want to make sure of one thing—I have read some posts that say you don’t require a diode across the solenoid, and other posts that say you do require one. I received one with the controller, do I was thinking it should be installed, but I think it may have been Scotty who said not to install in it that the controller had an internal one —- thanks I just want to make sure I do the correct installation—- thanks again
|
10-27-2018, 09:51 AM | #65 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,204
|
Re: Still not working
Read this post, as to you I think your info needed begins at post #5. http://www.buggiesgonewild.com/elect...th-diodes.html
|
10-27-2018, 12:36 PM | #66 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Still not working
It's a long story. But in short, use the 2 diodes.
|
10-27-2018, 01:34 PM | #67 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: Still not working
Thanks Scotty, I only got 1 with the controller, so I’ll put it on —- thanks
|
05-24-2019, 12:37 PM | #68 |
Getting Wild
Join Date: Jun 2018
Location: Ontario Canada
Posts: 122
|
Re: Still not working
Hello everyone, almost have my cart working, I installed an Alltrax 400
controller with an SW 180 solenoid, everything seems to work ok except the reverse buzzer stays on regardless of what position the (rocker) switch is in and when the switch is in neutral, when you press the gas pedal the cart reversed, not sure what to check, I tried bypassing the buzzer, but it still reverses when in neutral. Thanks for any help |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
My Trail Hog just stopped working, and then started working again. | Electric EZGO | |||
Working on G2 | Gas Yamaha | |||
Battery Charger Not Working - Cart Not Working | Electric EZGO | |||
Need Help 96 DCS not working | Electric EZGO | |||
WTB non working TXT gas | Golf Carts and Parts |