|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-06-2019, 01:03 PM | #21 | ||
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36v TXT in limp mode after towing
Quote:
Check reed switch. Quote:
Attached is diagram showing voltage paths through PDS controller. |
||
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2019, 01:32 PM | #22 |
Not Yet Wild
Join Date: Apr 2019
Posts: 35
|
Re: 36v TXT in limp mode after towing
How would the return wire from beeper be shorted to B-?
Sent from my iPhone using Tapatalk |
06-06-2019, 01:36 PM | #23 | |
Not Yet Wild
Join Date: Apr 2019
Posts: 35
|
36v TXT in limp mode after towing
Quote:
Would it be shorted inside the controller? Sent from my iPhone using Tapatalk |
|
06-06-2019, 02:14 PM | #24 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36v TXT in limp mode after towing
Quote:
The frame is not supposed to be grounded (B-), but phantom current paths exist in just about every cart and it only take a few micro-amps to make beeper sound. Of course, the most likely suspect is a bad beeper circuitry in the controller. |
|
06-06-2019, 02:48 PM | #25 | |
Not Yet Wild
Join Date: Apr 2019
Posts: 35
|
Re: 36v TXT in limp mode after towing
Quote:
|
|
06-06-2019, 03:51 PM | #26 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36v TXT in limp mode after towing
Quote:
The voltage on the pins I mentioned earlier, tell the controller to pass amps to the motor. If it doesn't do what it is being told to do, it is bad. |
|
06-06-2019, 04:41 PM | #27 |
Not Yet Wild
Join Date: Apr 2019
Posts: 35
|
Re: 36v TXT in limp mode after towing
They sent me two controllers by mistake, so I have tried both. One has the beeper issue and neither will make it go. FWIW the ones they sent are Master Drive 350amp controllers.
Sent from my iPhone using Tapatalk |
06-06-2019, 04:46 PM | #28 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 36v TXT in limp mode after towing
Do either of them have an LED for error codes, or do they have a diagnostic mode for beep codes? You may have to Google or contact the seller.
|
06-06-2019, 05:02 PM | #29 |
Not Yet Wild
Join Date: Apr 2019
Posts: 35
|
Re: 36v TXT in limp mode after towing
Yes in diagnostic mode I get 3-1 beep
Sent from my iPhone using Tapatalk |
06-06-2019, 05:05 PM | #30 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 36v TXT in limp mode after towing
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club car limp mode | Electric Club Car | |||
2009 rxv in limp mode please help | Electric EZGO | |||
Ezgo RXV goes into limp mode | Electric EZGO | |||
EZ-GO 2003 TXT in and out of limp mode | Electric EZGO | |||
05 DS in limp mode. | Electric Club Car |