Another solenoid guestion.

[Goober11]

Originally Posted by biphase

Before you buy a controller check the throttle signals on J4

J4 pin 1 goes to 36 volts AFTER you step on pedal.
J4 pin 2 is 36 volts BEFORE and AFTER you step on pedal.
J4 pin 3 varies with pedal position from about 1.5v to 3.0v
J4 pin 4 is about 14v.

Thanks biphase will check today. I have pulled it off but will put it back on to test.

[Goober11]

Originally Posted by Goober11

Thanks biphasic will check today. I have pulled it off but will put it back on to test.

All voltage in pins 1-4 test like you listed.
This was testing the ITS right. So I am still looking at a controller.

[biphase]

Originally Posted by Goober11

All voltage in pins 1-4 test like you listed.
This was testing the ITS right. So I am still looking at a controller.

Yes, this procedure tests the ITS so it seems to be OK.

[Goober11]

Originally Posted by biphase

Yes, this procedure tests the ITS so it seems to be OK.

Again thanks for your help with this. I know most on BGW are not a big fan of a rebuilt controller. I was thinking about sending it to FSIP. I will have time to think about it an look at all my options going to Hatteras, NC for 10 days. Will up date when I get this cart running.

Terry

[nickdalzell1]

It's not so much we're not fans it's just that Alltrax has been making tougher and far more capable controllers that direct-fit in.

[Goober11]

With more testing it looks like the motor is bad also. Going to just keep it for parts. What is left of it.