lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-20-2021, 12:40 PM   #1
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default EZGO wiring

HELP Bought a project 2000 western Elagente on EZGO CHASIS OMG it didn’t have any batteries in it so just a bunch of wires hanging that I have no idea where they go. I’m not so worried about all the accessories at this point I just want to get it running. It’s a 2000 Lincoln looking cart it has all the street legal goodies if I ever figure out how to hook them up. But rite now I need to know where the 2 wires from the key switch go I think 1 goes to the pos post of the battery’s, which I have 50 volts on brand new batteries and I’m guessing the other one goes to the f/r switch. The switch was even out of it just laying in the floor. It has a 5 position switch but looks real bad, so I’m wanting to put just a simple 2 position in it for now. And I’ll hook all the accessories up individually later. I’m guessing all the acc, trunk release, horn, head and taillights, state of charge meter are all 12 volt which I’ve bought a 48/12 volt reducer, hope there is some wiring gurus out there, cause I sure need help.
rocketman71421 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 02-20-2021, 12:41 PM   #2
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

I bought a new switch on Amazon for EZGO and it does have 4 terminals on it. I at this point just want to get it running. So I hook 1 post to 48 volt + and the other goes where?
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 12:42 PM   #3
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

The person I bought it from is absolutely no help at all. it has a 36/48 volt motor and a 36/48 volt Curtis controller and it had a 36 volt solenoid on it and a 48 volt charger. And he said it was a 36 volt? With wires hanging everywhere. So I bought a 48 volt solenoid and 6/8 volt batteries. I need some big time help
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 12:45 PM   #4
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

I’m trying to do the basics the controller and all the wiring under the seat has not been unhooked. That all seems to be ok it’s all the wiring under the dash and switch to f/r from f/r to what is the problem
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 12:48 PM   #5
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

I want to do it just get it running wires to switch - F/R - solenoid all batteries are hooked up it’s just power to solenoid and f/f switch I’m trying to isolate just the running of it I’m a machine repair from Ford mo co, but I am a definitely a wiring for dummies type lol
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 12:49 PM   #6
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

It has a 36/48 volt Curtis controller and it’s never been unhooked all I did was replace the 36 volt solenoid with a 48 volt
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 12:51 PM   #7
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

It’s a EZGO series drive with the f/r handle by the right leg
rocketman71421 is offline   Reply With Quote
Old 02-20-2021, 01:29 PM   #8
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: EZGO wiring

Here is a schematic for a EZGO series drive in a TXT body style.

Have no idea of where to find a wiring diagram for the accessories in your cart.
Attached Images
File Type: jpg Wiring Diagram - Series.JPG (55.8 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 02-20-2021, 04:36 PM   #9
rocketman71421
Not Yet Wild
 
Join Date: Feb 2017
Posts: 19
Default Re: EZGO wiring

Thanks JohnnieB wish me luck I’m surly going to need it!
rocketman71421 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
07 ezgo non pds wiring Electric EZGO
76-79 ezgo gas wiring Gas EZGO
EZGo Wiring Help Electric EZGO
94.5 EZGO wiring Electric EZGO
ezgo wiring Electric EZGO


All times are GMT -5. The time now is 03:57 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.