lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-01-2021, 01:18 PM   #1
clid3r
Not Yet Wild
 
Join Date: Jun 2021
Location: Tampa
Posts: 1
Default Tuning Software Profiles for Icon

Have been screwing around with the settings on my cart (I40FL with 180ah Allied LiPos).

Does anyone have a profile saved somewhere they can share that has aggressive acceleration/max speed because I feel like I'm missing something.

I have the acceleration set to .1.

I reduced it from 6 to 3, and then 2... moving it anywhere lower than that didn't do anything noticeable. I had it set on .01 and noticed no different.

With MAX RPMS for REV and acceleration at 4, it backs up more quickly than it goes forward and has a hell of a lot more torque (it seems).

Ive seen carts that have some wicked acceleration off the line and mine definitely does not have that. I mean, it def is faster than my buddies cart by a long shot (same model, lead acid), but its not the 'whiplash' inducing acceleration.

Anyone have a profile they care to share or some suggestions on the settings?

Acceleration is what I care most about... I use this downtown and that's a lot more important than top end (which is the easiest to set).
clid3r is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-01-2021, 07:39 PM   #2
dcardullo
Not Yet Wild
 
Join Date: Nov 2021
Posts: 6
Default Re: Tuning Software Profiles for Icon

adjust to torque/speed profile... i got mine to 0-20 in no time.. now 20-35 thats a different story
dcardullo is offline   Reply With Quote
Old 01-20-2022, 11:44 AM   #3
BDT1
Not Yet Wild
 
Join Date: Jan 2022
Posts: 1
Default Re: Tuning Software Profiles for Icon

Where can I get a copy of the tuning software? I have the cable just can't find a place to get the software.
BDT1 is offline   Reply With Quote
Old 01-24-2022, 06:38 PM   #4
kdsone
Not Yet Wild
 
Join Date: Jan 2022
Location: SE Florida
Posts: 4
Default Re: Tuning Software Profiles for Icon

I just recently got my i40L. Love it, wish it could be a bit faster. I am looking to find the software also. On this site I found it posted, but the post has expired. Plus it said it was for 2021 and under. I am looking for 2022 software.
kdsone is offline   Reply With Quote
Old 01-31-2022, 10:36 PM   #5
alangsam
Getting Wild
 
Join Date: Dec 2015
Posts: 100
Default Re: Tuning Software Profiles for Icon

Quote:
Originally Posted by BDT1 View Post
Where can I get a copy of the tuning software? I have the cable just can't find a place to get the software.
where did you get the cable?
alangsam is offline   Reply With Quote
Old 02-01-2022, 11:09 AM   #6
kdsone
Not Yet Wild
 
Join Date: Jan 2022
Location: SE Florida
Posts: 4
Default Re: Tuning Software Profiles for Icon

Quote:
Originally Posted by alangsam View Post
where did you get the cable?
I have purchased both the programing cable (amazon) and the CANUSB cable. Now I realize I don't need them because my cart is 2022. I can sell you mine for a discount. If interested send me a message.
kdsone is offline   Reply With Quote
Old 02-10-2022, 05:41 PM   #7
houdini
Not Yet Wild
 
Join Date: Jan 2022
Posts: 8
Default Re: Tuning Software Profiles for Icon

I have an i20L and would like advise on how to increase the top-end speed to 30, currently it's at max 25. I don't care about the initial acceleration just the top end speed. Lead acid batteries, 48v, 2021 model. I have all the necessary tools (CANUSB, cable to laptop, software) so if anyone has a profile I can simply upload that would be appreciated, or just advise on what needs to be tweeked.
houdini is offline   Reply With Quote
Old 02-10-2022, 09:16 PM   #8
ATrain
Gone Wild
 
Join Date: Oct 2012
Location: SoCal
Posts: 641
Default Re: Tuning Software Profiles for Icon

Quote:
Originally Posted by houdini View Post
I have an i20L and would like advise on how to increase the top-end speed to 30, currently it's at max 25. I don't care about the initial acceleration just the top end speed. Lead acid batteries, 48v, 2021 model. I have all the necessary tools (CANUSB, cable to laptop, software) so if anyone has a profile I can simply upload that would be appreciated, or just advise on what needs to be tweeked.
If you have the cables and software, then all you need to do is change line #45 to (MPH * 200). So if you want 30MPH it would be 6000.

In the below sample picture, I had set mine to 7000. Ignore the red part. Honestly I'd recommend you set it higher than 6000 only because it's the "top end" speed...you won't actually hit it that often.

Imagine if you set your car's "top speed" to 600mph. Doesn't mean it's going to get there. I'd set it to 6500 (32.5mph) or 7000 (35mph) and you'll most likely hit 31mph when there is 1 person on it and you're on a flat surface for a good stretch.

ATrain is offline   Reply With Quote
Old 02-18-2022, 10:14 AM   #9
fixed4life
Not Yet Wild
 
Join Date: May 2021
Location: South Florida
Posts: 33
Default Re: Tuning Software Profiles for Icon

Quote:
Originally Posted by clid3r View Post
Have been screwing around with the settings on my cart (I40FL with 180ah Allied LiPos).

Does anyone have a profile saved somewhere they can share that has aggressive acceleration/max speed because I feel like I'm missing something.

I have the acceleration set to .1.

I reduced it from 6 to 3, and then 2... moving it anywhere lower than that didn't do anything noticeable. I had it set on .01 and noticed no different.

With MAX RPMS for REV and acceleration at 4, it backs up more quickly than it goes forward and has a hell of a lot more torque (it seems).

Ive seen carts that have some wicked acceleration off the line and mine definitely does not have that. I mean, it def is faster than my buddies cart by a long shot (same model, lead acid), but its not the 'whiplash' inducing acceleration.

Anyone have a profile they care to share or some suggestions on the settings?

Acceleration is what I care most about... I use this downtown and that's a lot more important than top end (which is the easiest to set).
Besides the usual recommended tweaks folks do here, I have had the most success with working in the Torque Limits Map. You need to have enough battery, large enough cables, etc, etc, or you will just cause voltage sag that will cause the controller to cut power. But, if you do, you can dial in the power quite nicely there.
fixed4life is offline   Reply With Quote
Old 04-04-2022, 12:01 PM   #10
UroGator
Gone Wild
 
UroGator's Avatar
E-Z-GO
 
Join Date: Jan 2014
Location: FL
Posts: 291
Default Re: Tuning Software Profiles for Icon

Quote:
Originally Posted by kdsone View Post
I have purchased both the programing cable (amazon) and the CANUSB cable. Now I realize I don't need them because my cart is 2022. I can sell you mine for a discount. If interested send me a message.
I'm interested in buying your cable and CANUSB. Sent you PM
UroGator is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Icon


Thread Tools
Display Modes


Similar Threads
Thread Forum
Icon Tuning w/ NEOS Software Icon
NEOS/ICON Programming Software Troubleshooting Icon
ICON Portal Charging algorithm software Icon
SPM Profiles Extreme DC!


All times are GMT -5. The time now is 09:09 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.