|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-05-2011, 06:34 PM
|
#1 |
|
Gone Wild
 Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Ezgo brake return torsion spring
Is there any tip or tricks for getting. This damnnnnn thing back on. It's giving me problems and really pissing me off.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-05-2011, 06:42 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Ezgo brake return torsion spring
install one brake shoe.
install the springs on it. set the second shoe in place but at a 45 degree angle out from the backing plate. Install the springs to the second shoe. push the shoe flush to tthe backing plate and lock it in place. |
|
|
|
|
08-05-2011, 07:07 PM
|
#3 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Ezgo brake return torsion spring
No I'm talking about the Pedal return spring. The huge one.
|
|
|
|
|
08-05-2011, 07:48 PM
|
#4 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Ezgo brake return torsion spring
Oh, that one is a little more fun...... you have to fight with it a bit. I usually use at least 2 flat blade screwdrivers and typically end up with a few skinned knuckles...... Needless to say, I remove them as a last resort.
|
|
|
|
|
08-05-2011, 07:57 PM
|
#5 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Ezgo brake return torsion spring
You remove what as a last resort? This is making me go crazy. I should have done this before I installed the fricking floor pan.
|
|
|
|
|
08-05-2011, 08:24 PM
|
#6 |
|
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: Ezgo brake return torsion spring
I remove that torsion spring as a last resort..... they are a bitch to replace.....
|
|
|
|
|
08-05-2011, 08:31 PM
|
#7 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Ezgo brake return torsion spring
Well I had to remove it. I took my cart all the way down to the frame. Well now I regret doing it. But there has to be a way to do it.
|
|
|
|
|
08-05-2011, 08:32 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Ezgo brake return torsion spring
Agree with your after thought but it can be done from below..... you just need to find the right tool I think I used a brake adjustment tool last time?
|
|
|
|
|
08-05-2011, 08:35 PM
|
#9 |
|
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Ezgo brake return torsion spring
Man I'm sick of it. It's such a bitch and I don't know why?!?!? I just need to pop it over that one piece of metal and I'm done. But noooooooo
|
|
|
|
|
08-05-2011, 08:48 PM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Ezgo brake return torsion spring
 Try 2 pairs of vice grips, a screwy driver and a hammer. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 Accelerator Torsion Spring | Gas Yamaha | |||
| Brake spring getting red hot when running | Electric EZGO | |||
| brake pedal doesnt return all the way | Electric EZGO | |||
| torsion adjuster under air box 89' G2 | Gas Yamaha | |||
| brake return spring needed | Golf Carts and Parts | |||
Linear Mode
