|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-02-2011, 04:50 PM | #1 |
Gone Wild
Join Date: Jul 2010
Location: salina ks
Posts: 161
|
G9 Running rough
Last nite it ran great. Went to start it today and all it would do is spudder.
Took off the air filter and noticed that it was spraying gas out of the carb. I have an inline fuel filter and noticed that it isnt full of gas like it usually is. So i also noticed it was almost empty so i filled it up and still the same thing. Also noticed that the line coming off of the motor to the fuel pump was cracked. Is this why i have very little fuel in the line? How do you prime the pump? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2011, 08:35 PM | #2 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: G9 Running rough
Did you replace the cracked line? Gas spraying out of the carb sounds like a stuck float or trash in the float valve seat. I would clean the carb just for the fun of it
|
09-03-2011, 10:02 AM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Running rough
What JMZ said, also adjust valves to .004 cold.
|
09-03-2011, 10:02 AM | #4 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Running rough
Jmz, fun?
|
09-03-2011, 11:46 AM | #5 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: G9 Running rough
Jmz, fun?
|
09-03-2011, 02:02 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Running rough
Cleaning carburetors is fun?? I think I would rather do torque springs!
|
09-03-2011, 02:30 PM | #7 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: G9 Running rough
Not me. I don`t like putting the ratchet strap around it to release the key . But it all beats doing this
|
09-03-2011, 02:31 PM | #8 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: G9 Running rough
I would have had my Honda 20 motor in my cart if my truck would not have needed attention.
|
09-03-2011, 02:34 PM | #9 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Running rough
What r ya doin? Head gasket?
And how did you get that head out a there? Heavy!! |
09-03-2011, 03:28 PM | #10 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: G9 Running rough
Yes , HG. I have a small chain hoist ( 2T ) hanging in the middle of my shop.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
g2a running really rough | Gas Yamaha | |||
90 spirt running rough | Gas EZGO | |||
'86 running rough | Gas EZGO | |||
G16 running rough | Gas Yamaha | |||
G16 Running rough | Gas Yamaha |