ISO Club Car rear roof struts

[UncleJerm76]

Looking for steel (not aluminum) rear roof struts for a 2001+ that are compatible with a dump bed. ie: they must attach to the sides of the seat back.


Sent from my iPhone using Tapatalk

[scottyb]

If you can email me a picture of the strut you are looking for or a cart with it on it - I will look see.

[UncleJerm76]

Doesn't have to be exactly like this pic but just need to attach from the sides so as to not interfere with my dump bed operation. As long as they are steel and attach to the sides I can rework them, shape & tweak them into exactly what I need. But this should give you an idea.




Sent from my iPhone using Tapatalk

[UncleJerm76]

...another slightly different design that attaches to the side of seat back frame



Sent from my iPhone using Tapatalk

[BLACK DEATH]

Where you get the dump bad from and how does it mount?

[UncleJerm76]

Made it from my standard bed. Pics coming soon to my build thread ...just got to finish these roof struts first. Wish I had a 1" square tube bender - if be done by now!


Sent from my iPhone using Tapatalk

[JoeBleaux]

Originally Posted by UncleJerm76

Made it from my standard bed. Pics coming soon to my build thread ...just got to finish these roof struts first. Wish I had a 1" square tube bender - if be done by now!

CAUTION - Cart novice reply: why not just use something like conduit and a bender, then rattle-can it? It seems folks are looking for the OEM square-tube struts, but it seems that lots of folks would have very ready access to round tube/conduit (any home improvement "big box" and lots of smaller HW/supply stores) and either bend it themselves or know where to get it bent locally and inexpensively (all sorts of places, many who could weld any needed tabs/mounting plates).

I guess my question would be, "why square tube on carts?"

[UncleJerm76]

All your points are spot on. The simplest explanation I have is that I like the look of things that could have been stock. Every factory CC DS that I can recall all had square tubing. I chopped the front struts 6" and will do the same with the rear once I can locate some. It's strictly a preference choice on my part. My cart is looking less stock every day though. And I know once I have access to a tube bender my whole cart will have an exoskeleton [emoji51]


Sent from my iPhone using Tapatalk

[UncleJerm76]

Any luck Scotty?


Sent from my iPhone using Tapatalk

[scottyb]

There is some of this stuff up in the barn from yrs ago... I have not had the time to dig through it to see what's there.
Shipping could be a challenge... I'm guessing you called around your local cart shops already?