|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
|
06-30-2014, 10:07 AM | #1 |
Not Yet Wild
Join Date: Jun 2014
Posts: 55
|
Updating "sticky" clutch side seal
Hi all.
This past weekend I replaced the clutchside seal On my G1 going off of the "sticky" here at the top of the forum. The steps outlined in the sticky ,if anyone can update it ,I think would be a plus on the gasket between the gear housing that must be removed to get at the seal.(i.e- Its the last step in the sticky ,but doesn't mention the gasket.Maybe someone here can update it just as a headsup if your ordering a seal you might want to know or purchase the gasket as well. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
"Low to the ground Golf Carts!" Album sticky... | On Road Golf Carts! | |||
Clarification on part of "Sticky" above | Electric Club Car | |||
EZGO Differential "Sticky" | Electric EZGO |