|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-24-2022, 07:38 PM | #1 |
Not Yet Wild
Join Date: Oct 2017
Posts: 38
|
Which controller
I have my battery situation sorted thanks for the help on here.
Lithium battery to install this week. I also would like a new controller as the local dealer is 3 hours away and need the controller setting changed as it was a fleet cart and has the old settings. Which controller would be the one to go for ? I have the stock controller and motor. 2018 drive 48 volt fleet. Thanks Mike |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-25-2022, 05:15 AM | #2 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 2,000
|
Re: Which controller
Depends to the drive system (AC/DC), for DC go with an Alltrax XCT and for AC with Navitas TAC2. Both available plug n play for Yamahas.
|
09-25-2022, 07:15 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Which controller
If DC drive use an Alltrax XCT48400 YDRE control and SW180 solenoid. Set to the Lithium battery draw limits. You will be amazed at the performance.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Taylor Dunn controller to Altrax Controller. #2 wire goes where on Alltrax controller | Electric golf carts | |||
Stock curtis 300amp controller to Alltrax SR controller for a 94 club car ds | Electric Club Car | |||
Is the Curtis 1311-1101 Controller Handset PMC a good controller | Electric EZGO | |||
Navitas TSX 440A Controller, Harness for Club Car IQ-up and Dash-Mount OTF Controller | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO |