Danaher to Curtis Question!

usgicollector · 10-31-2018, 09:30 AM

With the Curtis 235 amp controller.

NBE · 10-31-2018, 09:55 AM

Kind of thought that but wanted to make sure.

Thanks!

Dave1888188 · 07-03-2019, 02:30 PM

Quote:

Originally Posted by rngilliland

If you only have the controller you will need a few more parts.

Left controller bracket #623170

Right controller bracket #623213

Heat shield #623433

Harness Adapter #626124

Resistor .86 ohm #619001

10awg white wire #607707

10awg white wire 400mm #624611

6awg black wire 830 mm #624618

You will need the left and right controller brackets and harness adapter. And probably the heat shield. If the old heat shield will bolt to the new brackets you could reuse it. The resistor and wires are included in the kit so I listed the part numbers but you can probably reuse the ones you have. The two white wires are for the resistor and the black one is a longer negative battery cable.

The mount for the Danahar controller is built into the controller but the Curtis controller uses the two brackets.

Would you need #626118,?? Ty. I know this is an old thread.

Sent from my SM-N960U using Tapatalk

10-31-2018, 09:30 AM	#21
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,238	Re: Danaher to Curtis Question! With the Curtis 235 amp controller.

10-31-2018, 09:55 AM	#22
NBE Not Yet Wild Join Date: Feb 2014 Location: Baton Rouge, La. Posts: 70	Re: Danaher to Curtis Question! Kind of thought that but wanted to make sure. Thanks!

Similar Threads
Thread	Forum
RXV Danaher to Curtis Conversion Documented	Electric EZGO
RXV Danaher to Curtis Conversion Instructions	Electric EZGO
RXV Danaher to Curtis Conversion	Electric EZGO
danaher to curtis orange wire ?	Electric EZGO
Danaher vs Curtis controller for golf only	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum