Turn signal/brake lamp kit

LowesChevy48 · 10-11-2018, 10:06 AM

When I purchased my cart it had headlamps and park lights on the rear. My question is what is needed to covert and make the turn signals/brake lights work. I chased the harness and found some wires labeled +12 aux driver/passenger turn signal and -12 aux driving lights and +12 aux driving lights.

2015 EZGO TXT

bronsonj · 10-12-2018, 08:44 AM

Try temporarily putting 12v power to those leads and see what it does. USE a fuse when doing it. If they blink then all you need is power and a switch. If they stay on as long as there is power then you need to regulate that externally.

LowesChevy48 · 10-12-2018, 10:02 AM

Quote:

Originally Posted by bronsonj

Try temporarily putting 12v power to those leads and see what it does. USE a fuse when doing it. If they blink then all you need is power and a switch. If they stay on as long as there is power then you need to regulate that externally.

Thanks, any recommended amp rating for the fuse?

10-12-2018, 08:44 AM	#2
bronsonj Gone Wild Join Date: Jan 2013 Location: Saint Petersburg, FL Posts: 2,089	Re: Turn signal/brake lamp kit Try temporarily putting 12v power to those leads and see what it does. USE a fuse when doing it. If they blink then all you need is power and a switch. If they stay on as long as there is power then you need to regulate that externally.

Similar Threads
Thread	Forum
How to wire Brake Turn Signal and Running Lights Together	Gas EZGO
Turn Signal and Brake Lights	Gas EZGO
Brake & Turn Signal Hook Up	Gas Yamaha
PDS Turn Signal & Brake Light Install	Electric EZGO
Turn signal and brake light wiring	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum