|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-15-2019, 02:17 PM | #1 |
Getting Wild
Join Date: Jun 2019
Posts: 86
|
98 ezgo txt will not move
I have replaced every part in the cart and still all it will do is click when I push the pedal down. I have no idea what's wrong. Its 36v , it was working last summer and over the winter it stopped. So i replaced everything one by one, i tested the motor and it works, I tested the voltage everywhere and seem like I got voltage
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2019, 02:47 PM | #2 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 98 ezgo txt will not move
Quote:
|
|
06-15-2019, 04:43 PM | #3 |
Getting Wild
Join Date: Jun 2019
Posts: 86
|
Re: 98 ezgo txt will not move
I dont have anything like this with that connector, and what do you mean eliminate it, like disconnect it
|
06-15-2019, 06:58 PM | #4 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 98 ezgo txt will not move
Quote:
Eliminating a connector means soldering or butt-splicing the four wire pairs. Some connectors serve a purpose. This one does not. Fabrication is all it was used for. The parts inside the throttle box already have spade connectors, and you'd replace them, not the whole box. Just looking for "low hanging fruit", as a possible cause, as a bad connection/corrosion on any one of the four wires can cause a "no go" scenario. |
|
06-15-2019, 07:02 PM | #5 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 98 ezgo txt will not move
What do you have?
http://www.buggiesgonewild.com/elect...en-system.html I have a '98 series and I use these. The Technicians manual has detailed step by step troubleshooting for both series and SepEx. Owners Manual for some newer electric carts http://products.jacobsen.com/img/man...645-g01-gb.pdf Technician's service and repair manual electric carts http://products.jacobsen.com/img/manuals/28646.pdf Service Parts Manuals electric carts http://products.jacobsen.com/img/manuals/28789-g01.pdf |
06-15-2019, 07:56 PM | #6 |
Getting Wild
Join Date: Jun 2019
Posts: 86
|
Re: 98 ezgo txt will not move
I haven't replace any connectors any where, they look pretty good
|
06-16-2019, 10:44 AM | #7 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: 98 ezgo txt will not move
Check Yurtle’s post directly above. He’s asking you to tell us which drive type is in your cart so he can help you with troubleshooting.
If the solenoid is clicking when you try to go, the problem is probably in the high current cables or controller, as opposed to the little wires. However, I have read about solenoids clicking but not actually latching. Is there 36v on both sides of the big lugs when the solenoid clicks? |
06-16-2019, 11:37 AM | #8 |
Getting Wild
Join Date: Jun 2019
Posts: 86
|
Re: 98 ezgo txt will not move
It is a series, and it cant be the solenoid cause I tested it with 3 different ones and all it does is clicks, I am thinking it has to be the controller but I just bought it but it still could be defective, is there an simple way to test the controller real quick
|
06-16-2019, 11:42 AM | #9 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 98 ezgo txt will not move
Quote:
Troubleshooting is Chapter E. Very easy, step by step. Ignore years. The manuals work for my '98 series. Owners Manual for some newer electric carts http://products.jacobsen.com/img/man...645-g01-gb.pdf Technician's service and repair manual electric carts http://products.jacobsen.com/img/manuals/28646.pdf Service Parts Manuals electric carts http://products.jacobsen.com/img/manuals/28789-g01.pdf |
|
06-16-2019, 11:46 AM | #10 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 98 ezgo txt will not move
Series carts of your year have this connector, unless you or PO already eliminated it. Mine was intermittent. I had to mess with it several times a year, until I eliminated it. Follow the four wire cable from the throttle box to the wiring harness, generally between the controller/solenoid and the FNR.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
01 EzGo Gas TXT will not always move | Gas EZGO | |||
Ezgo TXT won't move. | Electric EZGO | |||
94 EzGo won't move | Electric EZGO | |||
EZGO Doesn't Move | Electric EZGO | |||
EZGO will not move | Electric EZGO |