06-04-2020, 05:59 AM | #21 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Zeva BMS Not Working
The Zeva BMS has an internal power supply to provide +12v to the CAN bus, If there is a short on that connection perhaps the BMS will not power up.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2020, 06:43 AM | #22 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Zeva BMS Not Working
Disconnect the wires that go to the monitor and see if that will power up the ZEVA. It's not a requirement that the monitor be attached to the ZEVA for it to power up.
I don't think this will change anything......but it is a simple matter to do and worth a shot. |
06-06-2020, 07:13 AM | #23 |
Not Yet Wild
Join Date: Nov 2019
Location: Indio, CA
Posts: 49
|
Re: Zeva BMS Not Working
So the BMS is still dead after trying everything suggested by everyone. Ian has given me permission which will not void the warranty to open it up and look for a bad connection.
It’s probably going to be a day or two before I can get around to it. I’ll take some photos. I may need some expert eyes to take a look. If that doesn’t work, back to Australia for a replacement |
06-06-2020, 10:03 AM | #24 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Zeva BMS Not Working
Wow! Well, keep us posted. I know it's frustrating when you have a given expectation of a product and it simply doesn't work.
|
06-06-2020, 11:42 PM | #25 | |
Not Yet Wild
Join Date: Nov 2019
Location: Indio, CA
Posts: 49
|
Re: Zeva BMS Not Working
Quote:
|
|
06-07-2020, 06:13 AM | #26 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,214
|
Re: Zeva BMS Not Working
Circuit boards always amaze me as to what they do with all that tiny maze of wire.
Just looking at the back of the board (second pic) on the top between the second and third solder "bud" and the bottom between the 4th and 5th bud the solder seems "close". Is it possible to just take a small tool and scrape in between those buds to insure they are not causing a connection with each other? Just thoughts from a guy who is a tax expert.....not a wiring expert!! |
06-07-2020, 11:10 PM | #27 |
Gone Wild
Join Date: Aug 2016
Location: Prescott, AZ At a really nice Country Cub
Posts: 242
|
Re: Zeva BMS Not Working
I have a Zeva always wondered what was on the inside of the unit. Have not hooked it up yet to see if mine works. Today wired relays up following Sergio diagram he posted. Still have some more work to do yet. Am following your posts to see how you make out. Pic of my work today.
Sent from my iPad using Tapatalk |
06-08-2020, 07:53 AM | #28 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Zeva BMS Not Working
Sockeye342:
Maybe this suggestion/question is dumb, I don't know... You are utilizing the main contactor for the drive system for your BMS as well, instead of a separate contactor/relay, correct? I am assuming that you would need to have that circuit energized, for the BMS to power up. If that is the case, when you try to power up the BMS are you making sure that your run/tow switch is in run (assuming your GC has one) as well as your key turned on? I'm assuming you have thought of this, but just thought I'd bring it up. Last edited by BBBHC; 06-08-2020 at 11:52 AM.. Reason: clarifying who I'm responding to |
06-08-2020, 09:01 PM | #29 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Zeva BMS Not Working
I don't see anything obvious on the board that could be an issue, sorry about the setback.
|
06-10-2020, 03:20 PM | #30 | |
Not Yet Wild
Join Date: Nov 2019
Location: Indio, CA
Posts: 49
|
Re: Zeva BMS Not Working
Quote:
Looks like it is back to see Ian in Australia. The good news is Ian said he would reimburse me for the return postage :) I will get in an update when it returns...probably 3-5 weeks is my guess. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Zeva confusion.... | All things Lithium | |||
Zeva BMS - something is amiss | All things Lithium | |||
Zeva BMS Settings | Lithium Club Car | |||
ZEVA is on BGW. | All things Lithium | |||
Zeva & TC Questions | All things Lithium |