|
06-03-2020, 03:09 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2020
Posts: 11
|
01 pre iq OBC delete jumper setting. Blue and white?
I looked around and couldn't find the old sticky I had been using as reference. On the 01 pre IQ carts is it still the blue and white wire that need to be jumped. I'm new to forums so if I'm posting this wrong please let me know and point me in the right direction. Thnx
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-05-2020, 12:22 AM
|
#2 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 01 pre iq OBC delete jumper setting. Blue and white?
If it is a Sepex/Regen cart and you remove or fully bypass the OBC, you need that to prevent the controller lockout. If it was a Series cart, that is not applicable.
|
|
|
|
|
06-22-2020, 05:22 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 1
|
Re: 01 pre iq OBC delete jumper setting. Blue and white?
I'm trying to figure out this exact same thing. Are there any directions as to how to complete the bypass? Or any pics of how it looks after completed by chance? David Hicks explained it to me over the phone and I hate to keep bothering him. Any help would be greatly appreciated. Thanks!!
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| DPI Jumper Setting for Duracell Ultra | Electric Yamaha | |||
| mcor jumper | Electric Club Car | |||
| 2009 g29 jumper wire????? | Gas Yamaha | |||
| blue white smoke going down a hill | Gas EZGO | |||
| Does my Solenoid need a jumper wire? | Electric EZGO | |||
Linear Mode
