|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-31-2019, 12:57 PM | #1 |
Not Yet Wild
Join Date: Jul 2019
Posts: 6
|
DS seats pre and post '99
Can anyone confirm if the post '99 seat bases and one piece backs will fit on a '99 DS? I need to replace the wood base and reupholster the seats so I'm debating if it's worth recurving what I have or trying to source a set of plastic seat bases and the one piece back uppers used in later DS models.
Sent from my Pixel 3a using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-31-2019, 02:30 PM | #2 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: DS seats pre and post '99
I put 96 seat bottom on my 2003 DS. My seats are the suite seats. I did not want the side handles of the newer seats.
|
08-31-2019, 04:11 PM | #4 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: DS seats pre and post '99
The seat bottoms fit the same but the sides and the bases are different. You need the base And the side handles to make it work.
The seat back you can make fit if you remove the mount plates and make an adapter out of a couple pieces of 1" square tube to fit into the groove of the 00+ seat. You'll need about 3" long bolts and some patience to get everything lined up. The other option is to swap the roof and struts and seat back brackets to the newer style, but that's more expensive. |
08-31-2019, 10:33 PM | #5 |
Not Yet Wild
Join Date: Jul 2019
Posts: 6
|
Re: DS seats pre and post '99
Thanks. So to be clear, if I buy the seat base with handles, seat back and mounting brackets it will all fit? Just want to confirm the mounting locations are the same.
Sent from my Pixel 3a using Tapatalk |
08-31-2019, 10:48 PM | #6 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: DS seats pre and post '99
Here is one I built a couple years ago. New style seat back and old style top. All brackets bolted to the old style . I think this cart is a 1993. I think I had to drill 4 holes for the old style top to work but that was all. The seat back, brackets, sweater basket, and top braces are all newer style. Note the actual seat back here (plywood, foam, and cover) are not the factory style seat back. I made all of that but the factory seat back (if I had one) would have gone where this seat back is.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
What is everyone doing with their old seats? | Golf Carts and Parts | |||
Seats | Columbia ParCar | |||
seats for a G1 | Gas Yamaha | |||
i need seats | Gas Harley Davidson | |||
Replacing bench seats with boat seats (2001 EZ-Go) | Design Center |