Custom parts vs OEM Club Car?

[Beach Street Cruiser]

Originally Posted by WalterM6

The controller is programmable to any motor you want. And it's field programmable, you can do it yourself.



In case your're wondering how to wire the motor to test it, here's a picture. It shows 3 6v's but you can use 2 8v's or one 12

Good news, the motor works!
I’ll start with the controller and go from there.
Thanks again


Sent from my iPhone using Tapatalk

[Beach Street Cruiser]

Who’s got the best price on the 500A?


Sent from my iPhone using Tapatalk

[Mooncarter]

Originally Posted by Beach Street Cruiser

Good news, the motor works!
I’ll start with the controller and go from there.
Thanks again


Sent from my iPhone using Tapatalk

[Mooncarter]

Originally Posted by Beach Street Cruiser

Who’s got the best price on the 500A?


Sent from my iPhone using Tapatalk

Click on "Site Sponsors" above. There you will find "Revolution Golf Cars" and "Carts Unlimited." Either has the parts and advice you need.

[WalterM6]

One more thing. Get you a can of this and take apart all electrical connections and spray thoroughly. It's available at auto parts stores or Amazon.

https://smile.amazon.com/CRC-05103-E...s%2C133&sr=8-1

[BTMF]

Originally Posted by WalterM6

The controller isn't water proof from what I read. I suggest you start with a new Alltrax 500a controller. You will need it to get the 25 mph and haul 1000 lbs. Be sure to have your motor tested before you connect the new controller.

Hey how’s it going man. I’m the brother of beach street.

First I’d like to thank y’all for all your help!

I was wondering will the harness plug and play to that alltrax? Also do you recommend the SR-48500 or the XCT-48500? And last will I need to change the solenoid to a higher amperage one?


Sent from my iPhone using Tapatalk

[WalterM6]

Hey Bro, Yes the harness is plug and play. You need the XCT which is for Precedent sepex motors. And yes it is highly recommended that you upgrade your solenoid.

[BTMF]

Originally Posted by WalterM6

Hey Bro, Yes the harness is plug and play. You need the XCT which is for Precedent sepex motors. And yes it is highly recommended that you upgrade your solenoid.

Ok sounds good

thanks!


Sent from my iPhone using Tapatalk

[BTMF]

Originally Posted by BTMF

Ok sounds good

thanks!


Sent from my iPhone using Tapatalk

If I do go with the higher amperage solenoid. does it come with a new resistor/diode? or will the same one work?

Mainly asking because I just bought a new resistor because the one on here was toast I thought maybe that might be some of the issue I was having.


Sent from my iPhone using Tapatalk

[WalterM6]

The resistor is no longer used with the XCT. The diodes are. They should be furnished one with the solenoid and one with the controller.