|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-16-2019, 06:10 PM | #1 |
Not Yet Wild
Join Date: Sep 2012
Posts: 3
|
Can anyone identify this lift kit on my 93 DS?
I recently bought a 93 DS 36volt. It came with a lift kit installed and now I need to order the steel bushing that goes inside the brass bushing in the lower king pin. My problem is that I can not identify the lift kit or if it is even made. The lower bushing that I need is 0.5"ID X 0.755"OD X 2" long. I have attached a pic of the lift kit. Any help is definitely appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-16-2019, 10:51 PM | #2 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Can anyone identify this lift kit on my 93 DS?
Wow. That’s a new one for me! Let’s see if anyone else has seen it. Some kind of possibly homemade spindle lift I guess.
|
10-17-2019, 06:38 AM | #3 |
Not Yet Wild
Join Date: Sep 2012
Posts: 3
|
Re: Can anyone identify this lift kit on my 93 DS?
I thought that in the beginning but it just looks too clean to be a homemade lift and the brackets look professional.
|
10-17-2019, 10:11 AM | #4 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Can anyone identify this lift kit on my 93 DS?
I was thinking homemade also.
|
10-17-2019, 03:06 PM | #5 |
Gone Wild
Join Date: Mar 2012
Location: Baton Rouge, La.
Posts: 398
|
Re: Can anyone identify this lift kit on my 93 DS?
NAPA auto parts, any big bearing house, ebay, amazon
|
10-18-2019, 05:37 AM | #6 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: Can anyone identify this lift kit on my 93 DS?
It's an old Buggies Unlimited lift kit. (the square lower delta arm gives it away)
They used to sell for around $100 some 15+ years ago. I'll take a guess, and say that BU stopped importing them from China once they bought out Jake's lifts, So, I'll also guess that parts for them are no longer available. |
10-18-2019, 07:16 AM | #7 |
Not Yet Wild
Join Date: Sep 2012
Posts: 3
|
Re: Can anyone identify this lift kit on my 93 DS?
Thank you so much. It looked too good to be homemade and the spindles are pretty beefy. I needed the lower king pin bushings. I finally ordered a piece of DOM tubing and figured I would make my own. Next I need to pull the wheel bearings to see if they are standard size. Thanks again for the help.
|
10-18-2019, 07:36 AM | #8 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,927
|
Re: Can anyone identify this lift kit on my 93 DS?
The stock hubs and bearings are transferred from the stock suspension to the lift,
so they should be standard bearings you can get almost anywhere. |
10-18-2019, 08:12 AM | #9 | |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Can anyone identify this lift kit on my 93 DS?
Quote:
|
|
10-18-2019, 08:13 AM | #10 | |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Can anyone identify this lift kit on my 93 DS?
Quote:
|
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Can you identify lift size on my cart? | Gas Club Car | |||
Any way to identify lift kit? | Electric Club Car | |||
Can any identify this lift and these knuckles? | Electric EZGO | |||
How do I identify Jakes Axle Lift | Lifted Golf Carts | |||
Help to identify this | Gas EZGO |