11-28-2019, 04:21 PM | #21 |
Gone Wild
Join Date: Mar 2019
Posts: 323
|
Re: alltrax log file
Top connector is factory harness. Bottom connector goes to mcor
Sent from my SM-G960U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-28-2019, 04:30 PM | #22 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: alltrax log file
Unplug the connector, do You have 4.6v between the Purple and the white/black wires on the harness connector when the key is ON?
If so, do the pins that correspond to those two wires in the MCOR side stay at a fixed resistance as you press the pedal? If not, something is wrong, but if You want to try just changing the wires without identifying them as I had mentioned in the previous post, I would swap the White\Black and the Yellow\Black on the harness side connector. |
11-28-2019, 04:32 PM | #23 | |
Gone Wild
Join Date: Mar 2019
Posts: 323
|
Re: alltrax log file
Quote:
Sent from my SM-G960U using Tapatalk |
|
11-28-2019, 07:46 PM | #24 | |
Gone Wild
Join Date: Mar 2019
Posts: 323
|
Re: alltrax log file
Quote:
Sent from my SM-G960U using Tapatalk |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax Monitor function- log to file | Electric Club Car | |||
Alltrax data file for review | Electric EZGO | |||
Alltrax XCT500 can not log data file | Electric EZGO | |||
Alltrax custom file club car iq | Electric Club Car |