|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-04-2020, 05:07 AM | #11 |
Not Yet Wild
Join Date: Dec 2019
Posts: 16
|
Re: Alltrax xct installation what have I done wrong ??
So I’ve installed the alltrax controller and new solenoid and cables but seem to have done something wrong as the cart will only crawl in both forward and reverse . When it moves I would describe it like a shuddering ?
Here’s the photos of the install. I am aware I haven’t installed the diode between the small posts on the solenoid and intend to (can’t find it, but couldn’t resist trying it). The only other cable I haven’t used Is what I believe iis the speed sensor plug? Any help would be appreciated |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-04-2020, 04:25 PM | #12 |
Not Yet Wild
Join Date: Dec 2019
Posts: 16
|
Re: Alltrax xct installation
Found an article on carts unlimited and worked out there was a bad contact. Ended up being one of the large posts on the solenoid needed tightening .
Works and sounds sweet now |
01-04-2020, 06:35 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Alltrax xct installation
Glad to hear it
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
New EZGO Alltrax Installation | Electric EZGO | |||
Question about Alltrax installation | Electric EZGO | |||
alltrax controller installation help | Electric EZGO | |||
500 amp alltrax installation | Electric Club Car | |||
new alltrax installation | Electric EZGO |