01-09-2020, 10:11 AM | #1 |
Not Yet Wild
Join Date: May 2019
Location: North Dakota
Posts: 24
|
any ideas?
Ok, So i just installed the alltrax 400, new solenoid, and 2 gauge battery cables into my 2015 precedent.... everything is working well except when i plugged my car in to charge. It wouldn't do the 3 beeps that it has always done??? it was charged this morning but just confused as to why that would stop. any ideas?
Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-09-2020, 02:27 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: any ideas?
The 3 beeps, and the operation of the battery lamp on the dash are functions of the stock Curtis controller, which you removed.
The Alltrax doesn't do the 3 beeps, and it is not connected with the battery lamp on the dash. Mostly because those are non-necessary functions. Install a digital volt meter (with numbers, Not the bar graph) so you know when your batteries are getting low based on voltage. |
01-09-2020, 02:46 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: any ideas?
Amen to that !
|
01-09-2020, 02:51 PM | #4 | |
Not Yet Wild
Join Date: May 2019
Location: North Dakota
Posts: 24
|
Re: any ideas?
Quote:
|
|
01-09-2020, 03:49 PM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: any ideas?
With the new 2ga cables. How did you run the cable through the OBC
|
01-09-2020, 04:06 PM | #6 |
Not Yet Wild
Join Date: May 2019
Location: North Dakota
Posts: 24
|
Re: any ideas?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
looking for ideas | Gas Club Car | |||
Any ideas???? | Gas Yamaha | |||
any ideas | Gas Yamaha |