500 amp alltrax

ChevyRacing75 · 02-05-2010, 07:22 PM

Im trying to tune my 02 ezgo 36 volt with the 500 amp controller installed. I have the comp pluged in to the cart and it says "cannot locate motor control"

Any thoughts?

LostHusker · 02-05-2010, 07:34 PM

OK Chevy, tell me what you got for cables and besides what the program is telling you what else has happened?

ChevyRacing75 · 02-05-2010, 07:55 PM

Quote:

Originally Posted by MarksKarts

OK Chevy, tell me what you got for cables and besides what the program is telling you what else has happened?

ok I got it working. Looks like everything is set up like max output current and top speed.

Does that sound right? I attatched pic.

ChevyRacing75 · 02-05-2010, 07:59 PM

it says in the book it is only 400 amps but its a 500 amp controller. Why is that?

scottyb · 02-05-2010, 08:11 PM

Hey Chevy I see you figured out that you need to have the controller powered up beforw the progaram is turned on

That is why the software couldn't see the unit before.
I think you need to set the overvoltage at 60v and the throttle down at 2xs the throttle up ... like 5 and 15 will work... when in doubt set to default and see what the default settings are? Alltrax defaults are not bad except..... I hate 1/2 speed reverse when I am stuck in the mud

So I take it off

The program should recognize your controller properly? What's up with that ???

LostHusker · 02-05-2010, 08:15 PM

Quote:

Originally Posted by scottyb

Hey Chevy I see you figured out that you need to have the controller powered up beforw the progaram is turned on

That is why the software couldn't see the unit before.
I think you need to set the overvoltage at 60v and the throttle down at 2xs the throttle up ... like 5 and 15 will work... when in doubt set to default and see what the default settings are? Alltrax defaults are not bad except..... I hate 1/2 speed reverse when I am stuck in the mud

So I take it off

The program should recognize your controller properly? What's up with that ???

That 1/2 speed throttle I need to change on mine, it goes so slow, I can't stand it, I wonder sometimes if it is even going to work!

ChevyRacing75 · 02-05-2010, 08:35 PM

Is it normal for the led to be a orange color when the cart is floored? Running full speed the light is orangish not green?

scottyb · 02-05-2010, 08:36 PM

I know.... I want the power if I need it

Recently reprogrammed a members cart and after I delivered it ... I left him chirping some serious rubber marks on the pavement back and forth

back and forth

I'm like 'see ya later' .... he's like 'chirp ...chirp.... chirp'

LostHusker · 02-05-2010, 08:38 PM

Quote:

Originally Posted by scottyb

I know.... I want the power if I need it

Recently reprogrammed a members cart and after I delivered it ... I left him chirping some serious rubber marks on the pavement back and forth

back and forth

I'm like 'see ya later' .... he's like 'chirp ...chirp.... chirp'

Chevy, don't know, got the controllers working never looked after that

scottyb · 02-05-2010, 08:43 PM

No not normal ...... is it only redish when floored ar all the time? Set the controller top default settings. Then test it does it still turn orange?

02-05-2010, 07:22 PM	#1
ChevyRacing75 Maybe This Weekend :) Join Date: May 2009 Location: Lake Norman, NC Posts: 6,411	500 amp alltrax Im trying to tune my 02 ezgo 36 volt with the 500 amp controller installed. I have the comp pluged in to the cart and it says "cannot locate motor control" Any thoughts?

02-05-2010, 07:34 PM	#2
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: 500 amp alltrax OK Chevy, tell me what you got for cables and besides what the program is telling you what else has happened?

02-05-2010, 07:59 PM	#4
ChevyRacing75 Maybe This Weekend :) Join Date: May 2009 Location: Lake Norman, NC Posts: 6,411	Re: 500 amp alltrax it says in the book it is only 400 amps but its a 500 amp controller. Why is that?

02-05-2010, 08:11 PM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: 500 amp alltrax Hey Chevy I see you figured out that you need to have the controller powered up beforw the progaram is turned on That is why the software couldn't see the unit before. I think you need to set the overvoltage at 60v and the throttle down at 2xs the throttle up ... like 5 and 15 will work... when in doubt set to default and see what the default settings are? Alltrax defaults are not bad except..... I hate 1/2 speed reverse when I am stuck in the mud So I take it off The program should recognize your controller properly? What's up with that ???

02-05-2010, 08:35 PM	#7
ChevyRacing75 Maybe This Weekend :) Join Date: May 2009 Location: Lake Norman, NC Posts: 6,411	Re: 500 amp alltrax Is it normal for the led to be a orange color when the cart is floored? Running full speed the light is orangish not green?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-05-2010, 08:36 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: 500 amp alltrax I know.... I want the power if I need it Recently reprogrammed a members cart and after I delivered it ... I left him chirping some serious rubber marks on the pavement back and forth back and forth I'm like 'see ya later' .... he's like 'chirp ...chirp.... chirp'

02-05-2010, 08:43 PM	#10
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: 500 amp alltrax No not normal ...... is it only redish when floored ar all the time? Set the controller top default settings. Then test it does it still turn orange?

Similar Threads
Thread	Forum
Alltrax 650	Extreme DC!
Alltrax AXE 650	Golf Carts and Parts
Alltrax 400 amp for PDS	Electric EZGO
New Alltrax in a G19	Electric Yamaha
Has anyone used a Alltrax in a G19	Electric Yamaha