Governor Cable

[BearsFan315]

Looking at my Cart, noticed the Cable is Rigged Currently. Looks like the plastic clips are broke, and they used Zip Ties to Hold it in place.

Want to replace/ fix this cable, Looking at the Info Provided to me (Illustrated Parts List & Repair & Rebuild Manual) looks like this is actually the Governor Cable ?? Part No 102336001 cost about $12-15. Looks pretty easy to replace !!



Forgive my ignorance, I am trying to learn the cart and what is what. I originally thought it was the accelerator cable. but looks like the acc cable goes from pedal to the transaxle to a linkage/ lever then the governor cable goes from trans to carb.

[BearsFan315]

Well replaced the Governor Cable :)

Thanks to David at Revolution Carts for send the Parts !! Great Service

[zingerbateman]

Hey Bear, is your cable fairly taunt after install? I noticed my gov cable is sloppy on both ends where the boots are and was wondering if that is how yours was before you replaced it? Or was yours broke?

[BearsFan315]

taunt NO

there is play and slack in the cable. considering you can not control that the way they are made, snap into the brackets. guess i could tweak the brackets some, but have to make sure the cable fully extends and can fully travel.

main thing it they move and work smoothly.
i put them side by side bout same length and all (old vs new)

[zingerbateman]

thanks!

[BearsFan315]

got a question for other club car owners out there

does this look correct or is there too MUCH slack in the Governor Cable ??
press accelerator, it pulls accelerator cable & governor arm, then starts to pull governor cable after clack is pulled
Are these brackets correct or are they BENT out of shape ??

[BearsFan315]

does anyone have pictures of these brackets and cable on their DS ??

like to know if they are correct with the cable or bent out of shape