07-21-2018, 12:04 PM | #1 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
crankshaft specs
I have an 89 DS flathead that I had the engine overhauled by a 3rd party, to be nameless for now. After putting it back in the cart and getting it going, there is a noise under the seat. I pulled the drive belt off and it still makes the noise. The clutch has a small wobble. So I removed it and put a dial indicator on the shaft. It has .013 side play. That's too much isn't it? Measured on outer end of shaft with dial indicator.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2018, 07:30 AM | #2 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: crankshaft specs
I looked up the definition, and the spec I'm looking for is the "runout".
I'm also wondering if the engine bearing is the source of the noise I'm hearing. |
07-24-2018, 04:56 PM | #3 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,846
|
Re: crankshaft specs
|
07-25-2018, 03:38 PM | #4 |
Gone Wild
Join Date: Nov 2011
Location: SW MO
Posts: 265
|
Re: crankshaft specs
thank you so much!!!! springbok. I officially own a rebuilt engine with a bent crank. At least I know what direction to go now.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1987 ezgo gas crankshaft bearings specs | Gas EZGO | |||
79 PG2 Crankshaft | Gas EZGO | |||
crankshaft | Gas Yamaha | |||
Daihatsu 327 Crankshaft specs | Gas golf carts | |||
need crankshaft!! | Big Block Talk! |