|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-01-2010, 10:04 PM | #1 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
G16 Main Clutch Inspection
Does anyone have pics showing what needs to be checked/inspected. Sort of a clutch inspection sheet for dummies?
I would like to check mine but I do not know what to look for. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-05-2010, 10:07 PM | #2 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 Main Clutch Inspection
bump
Please |
01-05-2010, 10:39 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G16 Main Clutch Inspection
Put your car in nuetral, take off the drive belt, take the 3 10mm bolts holding on the cap off. Rotate the clutch and "turn" the rollers and look for "flat" spots. If they don't have flat spots (the weights can catch on them), put the zerk fitting to 12 oclock and shoot 1 maybe 2 shots of grease into it. Rotate the zerk to 6 oclock, push the floating flange to 6 oclock and wipe out any excess grease. Clean the cap (if needed) and you are good to go.
|
01-06-2010, 06:50 AM | #4 | |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 Main Clutch Inspection
Quote:
|
|
01-06-2010, 08:52 PM | #5 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G16 Main Clutch Inspection
they are what the weights rest on when the clutch is under acceleration. pics show weights and rollers on the g16 clutch
|
01-06-2010, 09:46 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G16 Main Clutch Inspection
Good job Sabercat. You explained it with a short sentence and 2 pic's. Wish I could do that. Seems I have to write an essay, thinking I can explain everything at once, Crap I just did it again!
|
01-06-2010, 10:13 PM | #7 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G16 Main Clutch Inspection
lol, but if you read the essay you learn a lot!
ps it was just luck i had a g16 clutch around |
01-06-2010, 11:32 PM | #8 |
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: G16 Main Clutch Inspection
Thanks
I assume these can be inspected on the cart.. |
01-07-2010, 05:55 PM | #9 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G16 Main Clutch Inspection
yes
|
01-08-2010, 10:28 PM | #10 |
Getting Wild
Join Date: Jan 2010
Location: Lake Stevens, WA
Posts: 119
|
Re: G16 Main Clutch Inspection
Perfect timing on the question and answers. I was wondering how to go about that.
Thanks to both. |
|
|
Similar Threads | ||||
Thread | Forum | |||
negative main through OBC? | Electric Club Car | |||
main solenoid | Gas Club Car | |||
main bearings | Gas EZGO | |||
G16 main jet | Gas Yamaha | |||
MAIN JETS | Gas Yamaha |