|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-10-2012, 06:28 PM
|
#1 |
|
Gone Wild
Join Date: Sep 2010
Location: Dorr, MI
Posts: 210
|
Driven Clutch Cam Removal?
I am trying to remove the cam off a driven clutch. 1996 TXT gasser. I have the C clip off but the cam is not moving after many taps with a hard plastic hammer and penetrating oil soaking on it. Am I missing something or just let the penetrating oil work its course with time?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-12-2012, 05:39 PM
|
#2 |
|
Gone Wild
Join Date: Sep 2010
Location: Dorr, MI
Posts: 210
|
Re: Driven Clutch Cam Removal?
Well just incase someone else has this problem here is my solution. After soaking with penetrating oil and beating with a hard plastic hammer for three days I went all out. The dremel went to cutting three grooves in the cam cover and then the 3 jaw puller went to work. Still took some work as it was stuck on pretty good. The ramp buttons were pretty much gone and the cam has some nice grooves wore in it. I hope the 28* kit I put in make a good difference after all this work.
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Driven clutch removal | Gas EZGO | |||
| G1 driven clutch nut: removal | Gas Yamaha | |||
| removal of driven clutch | Gas EZGO | |||
| 03 TXT Driven Clutch Removal Problem | Gas EZGO | |||
| Driven clutch removal? | Gas EZGO | |||
Linear Mode
