|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-22-2013, 05:57 PM | #1 |
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
New Canadian G1 owner
NEW TO BGW. I just picked up a 1980 yamaha G1 a couple of months ago and have been reading alot of the members threads. Yes i am from canada on the east coast in st. john's newfoundland, and believe it or not the G1 i have is mint no rust to worry about. You guys have given me alot of ideas for my cart and believe me i will be lifting and modifing it. I am just getting the cart straightened out, it runs great after one day of work. I don't see or have noticed any other guys from canada on BGW. I will be posting pics soon as i get into my garage to take some, you guys are great and i am sure i can be a great help to some of you. thanks BGW members.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-22-2013, 06:17 PM | #2 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: New Canadian G1 owner
Welcome Im from Chatham Ontario.
|
02-22-2013, 06:23 PM | #3 |
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: New Canadian G1 owner
Thanks for the welcome from chatham, this is a great way to share ideas, can't wait to start the build.
|
02-22-2013, 06:36 PM | #4 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: New Canadian G1 owner
I have a yamaha g16 with a jakes 6 inch lift.
|
02-22-2013, 07:02 PM | #5 |
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: New Canadian G1 owner
G16 is fairly new, but i can't find anything here in newfoundland that is newer than what i have, i am looking hard for one that is in the 1990's, so it would be easyer to modify. The build will continue anyway. I have the cart running good, but then i decided to rebuild the engine, so pic's will follow.
|
02-22-2013, 07:35 PM | #6 |
Gone Wild
Join Date: Sep 2010
Location: ontario
Posts: 182
|
Re: New Canadian G1 owner
I did my engine last winter it was smoking bad the rings were gone in it the guys helped me out alot just ask and they will help.
|
02-22-2013, 09:08 PM | #7 |
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: New Canadian G1 owner
I noticed that on BGW, I am a millwright so i work on lathes, milling machines, welding, and everything i need to modify my cart, and with the help on BGW i won't have any problems, and hope i can help other guys here to.
|
02-23-2013, 01:55 AM | #8 |
Gone Wild
Join Date: Nov 2012
Location: Ontario , Canada
Posts: 609
|
Re: New Canadian G1 owner
to BGW , a lot of great info . Here and a great bunch of people enjoying
There hobby Cheers ! |
02-23-2013, 05:12 AM | #9 |
Gone Wild
Join Date: Jun 2012
Location: Andover,ohio
Posts: 209
|
Re: New Canadian G1 owner
Welcome,be sure and read the newbie to G1 site,very good info
|
02-23-2013, 06:41 AM | #10 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: New Canadian G1 owner
Welcome jwalsh! I've rebuilt my whole cart with the help of the folks here. Hope you enjoy and visit my thread in the lifted cart section under "Another G1 Rebuild". Good luck to ya Ay
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Canadian source for 12"wheels & tires? | Electric Club Car | |||
Storing My Cart for the cold Canadian winter | Electric Club Car | |||
Canadian shipping | Big Block Talk! |