lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-06-2010, 06:52 PM   #1
madoc1
no clue
 
madoc1's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
Default pulser ohms

well i am confused. have a 89 3pg that has no fire. it used to till a rebuild. same pulser coil,etc. but in testing we found two pulsers with 155-156 ohms. looking at jons advice in the tech section it should be 75. but does not say for which engine. after going thru two pages of search, i see where there a lot of 155 range pulser out there. one guy said his manual says 155 (1986) i can't find a pre 89 manual to confirm this, so does anyone either have one or an opinion? ? jim
madoc1 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
pulser coil Golf Carts and Parts
controller sees over 5000 ohms Electric EZGO
how many ohms for coil Gas EZGO
pulser coil Gas EZGO
G1 Pulser coil Gas Yamaha


All times are GMT -5. The time now is 12:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.